Datsun 280ZX 1981, Руководство пользователя

Страница: 7 / 14

SEATS
FRONT SEAT ADJUSTMENT
The fore-and-aft control lever located at
the lower front of the seat releases the seat
latch. To adjust the seat position, move the
lever as shown and hold it while you slide
the seat forward or backward to the
desired position. Release the lever to lock
the seat in position.
CAUTION:
• Do not adjust the driver's seat while
driving. The seat may suddenly jerk
forward or backward, which could re-
sult in loss of control.
• After adjustment, test to be sure seat is
securely locked.
RECLINING SEAT
The reclining seat control levers are located
at the outside of each front seat. To adjust
the seatback, pull the lever upward, and
lean back until the desired angle is ob-
tained. To bring the seatback up again, pull
the lever and it will move forward. When
the desired angle is obtained, release the
lever.
After adjustment, test to be sure seat is
securely locked.
WARNING:
Never ride in a moving car with the
seatback in reclining position. Seat belts
are effective only when the wearer is in a
fully upright position.
TILTING FRONT SEAT
2+2 model
To facilitate entry to the rear seat, the
front passenger seatback tilts as illustrated.
When the latch is released, the seatback
will tilt forward and the seat will automati-
cally slide forward.
Rear seat occupant can tilt the front
passenger seat by moving the lever located
on the side of the seatback.
5