3-24
Activating the Noise Blanker
Activating the Noise Blanker
The Noise Blanker option (7000NB) is an impulse-type used in high-
noise environments. To activate the Noise Blanker, the appropriate
icon must be turned on.
1.
Press OPTION until the NB icon flashes.
2.
Press STATUS to turn the option ON.
Activating Voice Enhancement
The DSP-based Voice Enhancement option (7000VEM) suppresses
various types of noise and interference on voice communications.
The 7000VEM has two modes of operation. Mode 1 is referred to as
adaptive peaking and is useful in reducing atmospheric noise and static
inherent in HF signals. Mode 2 adds the ability to remove man-made
interferences like ignition and power line noises.
To activate this option, the appropriate icon must be turned on.
1.
Press OPTION until the OPT icon flashes.
2.
Press STATUS to turn the option ON.
3.
Press ALPHA, 21, and E.
Display: OPTION 1
TYPE x (briefly displays last mode entered)
4.
Enter the mode (1 or 2) for this transceiver and press E.
Note: To verify that the 7000VEM option has been installed, look for
OPT 1 MODULE to be displayed during start-up.
Activating Encryption
This high-level security option (7000ENCR) is accessed by activating
the ENCR icon.
1.
Press OPTION until the ENCR icon flashes.
2.
Press STATUS to toggle between 1 and OFF. The 1 position
turns the Encryption option on.
For more detailed information on this security option, refer to the
7000-Series High-Level Encryption Operator Manual (7000ENCR-
MSOP).
Содержание TW7000
Страница 2: ......
Страница 27: ...Installation 2 15 Figure 2 4 TW7000 Back Panel ...
Страница 28: ...2 16 Remote Control This page intentionally left blank ...
Страница 56: ...4 4 Field Level Servicing This page intentionally left blank ...