Datron TW7000, Руководство оператора

Страница: 47 / 56

Operation 3-19
Selecting a Scan Group
A scan group must be selected before customizing can be per-
formed. Use the following procedure to select the scan group:
1. Do one of the following:
If ALE is ON, press SCAN GROUP or select (2) SCAN GRP
from the ALE submenu. If ALE is OFF, press SCAN GROUP
or ALPHA, 15, and E.
Display: SCAN GRP xxx
2. Use the arrow keys to scroll to the desired scan group number or
use the keypad to enter the scan group number.
3. Press E. The newly selected scan group briefly displays.
Display: SCAN GRP xxx (where xxx is the new scan group)
This becomes the scan group that is modified when using other
menus, until the scan group is changed.
Customizing a Scan Group
Customizing a scan group involves reviewing the contents of a scan
group, adding and deleting channels from a scan group, and selecting
which of the channels in that group are to be scanned. To customize a
scan group
1. Press ALPHA, 2, and E.
Display: SCAN SET CHANNEL x NNN
(where x is the channel status and NNN is the
3-digit channel number)
Channels in a scan group are reviewed, use the arrow buttons to scroll
through the channels. Channels are shown in numerical order. Scan
groups channels are changed by deleting existing channels and adding
new ones.
To delete existing channels from the group:
1. Use the arrow keys to locate the channel to delete.
2. Using the alpha characters on the keypad, press D (delete).
3. Press E to accept the deletion.
To add new channels to the group:
1. Use the up arrow to scroll past the highest numbered channel
until xxx displays.