Datron neo, Инструкции по установке

Страница: 20 / 25

4 Safety regulations for operating the machine
Processing with minimum-quantity cooling lubrication system
4-2 DATRON AG Setup instructions neo
1.21
4.2 Processing with minimum-quantity cooling lubrication system
CAUTION
Hazard posed by using cooling lubricants!
When using cooling lubricants which have not been explicitly
recommended by DATRON, observe the manufacturer
specifications with regard to fire and explosion hazards. If in
doubt, consult a safety professional.
■
Canisters with cooling lubricants must be labelled.
■
Only use the cooling lubricants recommended by DATRON,
since these are optimally suited for the system. Non-
recommended cooling lubricants can lead to poor results and
damage of the machine.
■
When using cooling lubricants, make sure there is sufficient
ventilation at the setup site.
■
Observe the safety data sheet of the used cooling lubricant.
CAUTION
Danger of blockage in the vacuum cleaner!
Suctioning is not allowed when machining with cooling lubricants.
■
Switch the vacuum cleaner off beforehand.