3.1.3.2 RAID0 NO: RAID0 Switch
PLEASE TURN OFF THE POWER BEFORE CHANGE THE POSITION OF SWITCH
Switch to “RAID0” (the left side of “RAID0 NO”), RM12_1394B is in the “RAID” mode.
Switch to “NO” (the right side of “RAID0 NO”), RM12_1394B is in the JBOD mode.
Special Notes:
1.
DO NOT force to remove drive carrier, it will cause damage if removing the drive carrier from the chassis before
unlocking the carrier by using the proper key
2.
Although RM12_1394B supports hot swappable, never withdraw a HDD that is being read or written. Before you want to
disconnect 1394 cable or withdraw a HDD, please make sure data transmission has been completed.
3.
For the best result of ventilation inside the chassis, please don't open the case while RM12_1394B is operating.
