8
In this window, select the IP address of the print server that needs to be set to connect. The IP in the
figure is subject to the actual situation.
※
Notice
※
The print server is a product with an operating system, and it takes about 20 seconds to start up
from power-on to ready . Please wait.
3.3.3 Configuration tool software interface description
Configuration tool subsystem information, system parameters, network configuration, firmware
update, restart . 5 large modules
system message:
Mainly display the information of the current print server, such as running time, network, USB
interface, etc.
System parameters:
In this function module, you can modify the print server name, MAC address, print output mode,
and the network print service port corresponding to the USB port.
Network Configuration:
Provide to modify the IP address of the print server , products with WIFI function can configure
WIFI network. Users can use DHCP or manually assign IP addresses to configure, WIFI and
network ports need to be configured separately.
Firmware update:
Provides the function of updating the firmware of the print server. When users need to update
the firmware, they can contact our customer service to obtain the latest firmware package.
Reboot:
You can restart the print server through the tool software.
