6
3.2 Network cable connection
When the factory network port default DHCP state, when the network cable, automatically from the
router ( DHCP assigned a dynamic server) IP address, the user may router or DHCP terminal list server, a
query to the current print server IP address, when the print server is normally connected to the network, the
user can connect through the network through a browser or a configuration tool ( WINDOWS version). MAC
systems can only be connected through a browser.
Note: It is not recommended to use the automatic IP address acquisition for such products . After
connecting with the configuration tool, it is recommended to change the IP to a fixed IP address, or set it to
static allocation in the router.
3.3 Instructions for setting tools ( WINDOWS version)
The configuration tool software is an installation-free software. After downloading and decompressing,
you can run it directly.
file description
After running the configuration tool, the operating system may prompt you to allow access to the network.
If you use network configuration, you must allow network access before the configuration tool can obtain a
list of print servers on the network.
After running the configuration tool, the first step will prompt the user how to connect to the print server,
as shown in the following figure:
