Dateq SPL-D3, Руководство пользователя

Страница: 17 / 26

UK DATEQ SPL-D3 manual Installation 17
Installation
The SPL-D3 configuration software is complaint with the following operating systems:
•
Windows XP
•
Windows 7
•
Windows 8
•
Windows 10
Apple OSX, Linux and other operating systems are not supported. Minimum display resolution
1400 * 1050 pixels.
Web based configuration, readout and reporting will be supported in future firmware release and
therefor is not implemented in this manual.
Always use the latest software and firmware release that can be found at
www.dateq.nl .
Configuration
In this chapter the configuration and system settings for the SPL-D3 are explained. These settings
normally are made once on installation. All made settings can be stored in a backup file for later
use or restoring the original settings after changing.
Connecting the computer
The computer is connected to the display using a a standard USB-A to USB-B cable. After
connecting the SPL-D3 to your computer the standard windows drivers will be loaded. No extra
drivers are needed, they are included in your windows operating system.
On first connection installation of the standard windows
drivers can take several minutes depending on your
operating system.