Dateq MusiCall MPM8.8 Mono, Руководство по установке

Страница: 27 / 28

EN MusiCall Installation manual Monitoring 12
Monitoring the system
The PC software can be used to view the settings of the MusiCall host, and monitor
the system. So it is possible to monitor the output zones, the selected inputs, the
volume settings etc.
Inputs
Select ‘MusiCall host’ Æ
‘Extended info’. This window
show the (in)active inputs, and
the input attenuators.
Outputs
In this window it is possible to
monitor the selected input for all
the output zones, and monitor the
output volume. This window is
automatically updated when any
of the settings is changed.
Wallunits
This window shows the
connected wallunits, and their
firmware revisions. Another
feature is the possibility to show
the master-slave combinations.
When the a master or slave zone
is selected with the mouse-
pointer, all the combined zones
will light up green.
Consoles
The status and the firmware
revision of the consoles can be
monitored here.
Host info
Information about the MusiCall
host is showed here. The
firmware version, the number of
connected wallunits and consoles
can be read out, and the time that
the MusiCall host has been active
can be monitored.