Datecs MP-5000, Руководство пользователя

Страница: 37 / 48

- 39 -
User’s manual
Closing of a Bill,
For closing of a bill:
Enter the operator password,
T
O
=
T
A
L
, press table/seat number,
PLC
,
< >
then
T
O
=
T
A
L
.
For example: Operator 1, 12-th table, customer No. 3
press
1
,
T
O
=
T
A
L
, 1
,
2
,
.
,
3
,
PLC
,
< >
,
T
O
=
T
A
L
The unclosed bills (if any) are reported when trying to clear the ECR in
Z,1 or Z,2 mode followed by a message on th display “C-0”. It is possible (by
pressing the “C” key) to leave the Z-mode and close the bills in “register” mode
issuing the corresponding “Grand Total ” for each unclosed bill. However, it is
possible (by pressing the “0” key) to close the bills directly in Z-mode and to
continue with clearing of the ECR. In this case the “Grand Total” will not be
issued, but the sales will be properlystored into the registers of VAT groups.
Quick orders
For fulfilling quick orders there is no need to enter table number and
customer number. The only thing you have to do is press
PLC
after entering
the order.
Such order is closed immediately after registration. In this way the waiter
can fulfil quick orders for one or two items like coffee or cigarettes without
opening or closing a separate bill.
Printing of duplicate copies and internal receipts
1. Based on customer’s receipt it is possible to print duplicates and internal
copies from the receipt. The internal receipt contains this part of the order,
which is separated from the order based on the place where the item is received
( dish or beverage).
2. Duplicates and internal receipts are printed after entering of the order.
Printing is interrupted at the place of tearing the receipt. Pressing any key will
invoke further printing.
3. The quantity of duplicates and internal receipts is defined during ECR
programming ( Table No. 5, Field 7 and 8).
All manuals and user guides at all-guides.com