1 DATECS
DPP-350
Programmer’s manual VER.1.50
11
92
GS U
Selecting standard mode
93
GS W
Setting the print area width
94
GS X
Drawing a rectangular box with selected thickness in page mode
95
GS Z
Printing the non blank page area only in page mode
96
GS \
Specifying the relative vertical position in page mode
97
GS ^
Executing macro
98
GS c
Setting the Real Time Clock
99
GS f
Setting the font of HRI characters of the barcode
100
GS h
Setting the height of the barcode
101
GS k
Printing a barcode
102
GS p
Settings for 2D barcode PDF417
103
GS q
Selecting the height of the module of 2D barcode PDF417
104
GS w
Selecting the horizontal size (Scale factor) of the barcode
105
GS x
Direct text print in page mode
Asian Languages Support
106
FS !
Specifying printing mode of two-byte text data
107
FS &
Selecting two-byte text mode (JIS or GB2312)
108
FS -
Selecting/Canceling underline mode for two-byte text mode
109
FS .
Canceling two-byte text mode
110
FS C
Selecting Shift-JIS mode (Japanese version only)
111
FS S
Specifying character spacing for two-byte text mode
112
FS W
Selecting double size characters for two-byte text mode
Command Details
1.
Sounds the Buzzer (
BEL
)
Code:
[07h]
By executing this command the buzzer will beep
2.
Horizontal Tab command (
HT
)
Code:
[09h]
Shifts the printing position to the next horizontal tab position. The horizontal tab position is set by ESC D.
By default the horizontal tab position is at each 8th character (in 9th, 17th, 25th column) from FONT A.
3.
Printing a line and Paper Feeding command (
LF
)
Code:
[0Ah]
Prints data stored in input buffer and feeds paper with one line (the height of a line that has been set).
4.
Printing and Paper Feeding to the black mark position (
FF
)
Code:
[0Ch]
This command prints the data in the printer buffer and searches for black mark. It is ignored if black
mark mode is not specified.
