Datcon DT9502, Руководство по эксплуатации

Страница: 36 / 92

DT9502
36
20171205-V3
34. You see this

on the display. This is the value of
L1.HH. It can be changed to any values between 00.0 and
99.9. The digit at the left side is blinking.
35. Pressing the
► button you can select the next digit.
36. Pressing the
▲ button you can increase the value of the
blinking digit:

,

,

,

,

,

,

,

,

,

, etc.
37. After you have set the value of the hysteresis, press the
MENU button to exit from this sub-menu item, and you see
this:

.
Exit from the menu item 1. After finishing the settings, press the MENU button to exit
from the given menu item, and you see this:

.
(2. If you want to change the setting you have done just
now, or if you just want to check what you have typed in, go
on with the operation from point 2 of the
Sequence of
operations. )
(3. If you don’t want to exit the menu (you want to do further
settings), then you may select the desired menu items by
pressing the
▲ button.)
Exit from the menu
1. Press the MENU button. First the mnemonic

( Save ), then the mnemonic

( Exit ) are shown on the
display. With this the storing of the settings is completed.
The instrument has exited the menu and goes on with the
measurement.
You find a detailed training material on the limit outputs in
the Appendix, in Chapter
10.8 Limit outputs .