Datcon DT9100 B, Руководство по эксплуатации

Страница: 43 / 63

DT9100 B
Sequence of operations 11. If you want to test synchronisation input, press ▲
button to change

mnemonic to

mnemonic.
(Its meaning: synchronisation input test)
12. Press
ENTER button.
13. You will see on the display:
•

when the synchronisation input is in non-active state
(terminals 7 and 8 are, R > 200 kΩ)
or you will see on the display:
•

when the synchronisation input is in active state (terminals
7 and 8 are closed, R < 1 kΩ)
14. Press MENU button to exit this menu item:
you will see on the display the

mnemonic. The
mnemonic will be blinking.
15. Press the ▲ button to change the

mnemonic to
the

mnemonic. (Its meaning: Temperature
measurement)
16. Press
ENTER button.
17. You will see on the display the internal temperature of
the instrument in °C.
18. Press
MENU button to exit this menu item: you will see
on the display: the

mnemonic. The mnemonic will
bee blinking.
Exit from the menu item 1. Press the MENU button, to exit from the Tests menu
item, and you see this:

.
(2. If you want to return to the tests, go on from point 3 of
the Sequence of operations .)
(3. If you don’t want to exit the menu because you want to
perform further settings, you can select the desired menu
items by pressing the ▲ button.)
Exit from the menu
1. Press the MENU button. First the mnemonic

( Save ), then the mnemonic

( Exit ) are shown on the
display. With this the storing of the settings is completed.
The instrument has exited the menu and goes on with the
measurement.
20180905-V1
43