Datcon DT4220 E Series, Руководство по эксплуатации

Страница: 45 / 60

DT4220 E
20180619-V0
45
7.15. Menu item 16: Analog output signal setting
Function In this menu item you can choose between 4-20 mA and
0-20 mA output current.
[Factory default: 4-20 mA]
The analog output can indicate the error state too. When the error
occurs the analog signal changes to 3.2 mA or 22 mA. (selectable)
Sequence of operations 1. Enter the menu by typing the supervisor code.
2. Keep stepping by pressing the
▲ button as long as you see this
menu item.
3. Enter the menu item by pressing the Menu button.
4. Pressing the
▲ button, select the desired sub-menu item.
5. You can enter to sub-menu by pressing the Menu button and you
can exit from sub-menu item by pressing the Esc button.
(6. Press Esc button again if you want to leave the menu.)
The selectable sub-menus:


analog output type
4-20 or 0-20 mA.
 analog output error
3.2 or 22 mA.