Datcon DT4200, Руководство по эксплуатации

Страница: 36 / 84

DT4200
36
20181113-V0
7.6. Decimal point position (04. menu item)
Function Setting the position of the decimal point on the display, or
switching the decimal point off.
[Default factory setting: 3 decimals]
Sequence of operations 1. Enter the menu by typing the supervisor code.
The way the code should be type in is described in Chapter
7.1. Typing the code in. You see this on the display:

.
2. Keep stepping by pressing the ▲ button as long as you
see this menu item:

.
3. Enter the menu item by pressing the ENTER button.
4. You see this

on the display. The mnemonic is
blinking.
5. You can move the decimal point to the right by pressing
the
▲ button.
•


= 3 decimals [default factory setting]
•


= 2 decimals

•


= 1 decimal

•


= no decimals

•


=4 decimals
Exit from the menu item 1. After finishing the setting, press the MENU button to exit
from the menu item, and you see this:

.
(2. If you want to change the setting you have done just
now, or if you just want to check what you have typed in, go
on with the operation from point 3 of the
Sequence of
operations .)
(3. If you don’t want to exit the menu, as you want to do
further settings, then you may select the desired menu
items by pressing the
▲ button.)
Exit from the menu
1. Press the MENU button. First the mnemonic

( Save ), then the mnemonic

( Exit ) are shown on the
display. With this the storing of the settings is completed.
The instrument has exited the menu and goes on with the
measurement.