Datcon DT1400 Series, Руководство по эксплуатации

Страница: 35 / 72

DT1400 xx xx
20170920-V0
35
7.8. Enable / disable displaying the leader zeros (06.
menu item)
Function Leader zero: the zeros that stand in front of an integer of no
value. E.g. the instrument displays the value 5.2 together
with the leader zeros:

(default factory setting), or without the leader
zeros:

.
In this menu item you can either disable displaying of the
leader zeros, or you can enable this function again.
Sequence of operation 1. Enter the menu by typing a supervisor code.
The way the code should be type is described in Chapter
7.1. Typing the code in. You see on the display:

.
2. Keep stepping by pressing the ▲ button as long as you
see this menu item:

( Nul l = zero).
3. Enter the menu item by pressing the ENTER button.
4. You see this

on the display. The text is blinking
indicating that it can be modify.
5. You may switch between the two operating modes by
pressing
▲ button.
•


= the leader zeros are shown on the display
(Factory default setting).
•


= the leader zeros are not shown on the display.
Comment: one zero directly before the decimal point is
always shown on the display.