Datavideo WM-11, Инструкция по эксплуатации

Страница: 5 / 20

5
Introduction
WM-11 Professional Wall Mount is designed specifically for Datavideo
PTR-10/10T Robotic Pan Tilt Head as well as the PTZ camera series
(PTC-150/150T/200/200T). The two bubble level meters allow the user
to align the mounted device horizontally.
The four piece mounting kit is made of rugged metal and is easy to
install on any walls in either an upright or upside down position. The
assembled mount can support up to a 10 Kg load.
Note: WM-11 is designed for PTR series of robotic pan tilt heads and
PTC series of PTZ cameras.
Parts Assembly and Installation
In this section, you will be shown how you can assemble and install
your kit.
Pre-work
1. First check you have all the parts listed in the table below.
No. Part Names Qty
1 Wall plate 1
2 Left bracket 1
3 Right bracket 1
4 Round rod 1
5 Base plate 1
6 M5x20 nickel plated hex socket cap screw 12
7 Expansion bolt 4
8 Bubble level meter 3
9 M2.5 screw 6
10 M3 x 10mm screw and spring washer 4
11 M3 x 8mm screw 4