18
Cleaning the 60/40 Glass sheet
This product contains a sheet of 60/40 glass please handle it with care.
To avoid a risk of damage or injury please follow this instruction manual and use
caution when transporting, un-packing, cleaning, assembling or dis-assembling
this part of the product.
Datavideo recommend cleaning the glass regularly to remove dust and finger
print marks. This will ensure the best image quality is recorded when the camera is looking through
the glass.
Never attempt to clean the glass whilst it is mounted in the prompter
instead remove it carefully
from the hood using the tool provided to break the grip of the Velcro straps, clean the glass and then
re-install it into the prompter hood. Handle the glass carefully using the cloth covered edges of the
glass at all times.
To retain the required qualities of the glass and to avoid scratching the glass during cleaning.
Never use
abrasive cloths, pads or abrasive based cleaning fluids on the glass.
Never use
cleaning fluids based on an acid or vinegar solution.
Place the glass on a soft, stable, dirt and lint
free work surface such as a table with a clean
cloth already laid out on it. Then use a second
clean, lint free, soft cloth to clean the glass.
Do not apply cleaning fluids to the glass directly,
instead apply or spray a small amount of the
cleaning fluid onto the cloth. Proceed to clean
the glass and work in a light circular motion with the cloth. Ensure all finger marks and streaks are
gone before turning the glass over and repeating with the other side.
Once finished re-install the glass back into the prompter hood, again using the cloth covered edges
only.
Ensure the green circle sticker on the glass is facing you
and the red circle sticker is facing
the camera lens. Reseat/secure the camera hood if necessary.
