Datavideo SE-700, Быстрый старт

Страница: 25 / 32

25
Setup
Setup allows the user to perform basic output configuration such as Outputs, Audio, GPI Out and Resolution.
Start Outputs PGM Out PGM Out MultiView
Keyer
P-In-P Audio Off
DSK SDI 1 On SDI 2 On HDMI On
Still GPI Out Off Mode Pulse Width 1
User Input 1 Delay 0
Inputs Standard 1080i/50 Save
Setup
Outputs
In general, there are three output ports (SDI 1, SDI 2 and HDMI) available, which can be configured to output one
of the following:
• Freeze
• Still
• Input 4
• Input 3
• Input 2
•
Input 1
•
Clean PVW
•
Clean PGM
• PGM DSK1
• PVW Out
• PGM Out
• Multiview
Audio
This sub-option allows the user to turn ON/OFF the audio component of the SDI1-out, SDI2-out and HDMI-out.
GPI Out
The user is allowed to perform GPI configuration. After turning on the GPI, select the GPI mode, which is either
level or pulse. The pulse width can also be configured in the sub-option Width (1-9). GPI out can then be assigned
to one of Inputs 1-4 and the delay can be set to between 1 and 99.
Standard
This option allows the user to choose the appropriate output resolution such as 1080i/50. Once done, simply select
“Save” to confirm the selected output resolution.