Datavideo SE-700, Быстрый старт

Страница: 18 / 32

18
Start
Start option is primarily for the user to configure transition effects, such as mix effect, fade-to-black, and wipe. The
sub-options are:
•
Transition
• Wipe
• Border
• Position
• Matte
Start Transition M/E 30 DSK 30 FTB 30
Keyer
P-In-P Wipe Wipe 1 Soft 0 Width 10
DSK Border Luma 90 Sat 61 Hue 358.1
Still Position X 0% Y 0%
User
Inputs Matte Luma 81 Sat 86 Hue 299.9
Setup
Transition
Transition feature allows the user to switch between PVW and PGM views. The user may select the transition
effect and customize the selected effect. The configurable transition effects under this sub-option are Mix Effect
(M/E), Downstream Key (DSK) and Fade-To-Black (FTB).
Wipe
This sub-option provides the user with the capability of Wipe Effect selection and configuration of the border
softness and width of the selected wipe effect.
• Wipe – Wipe Effect Selection
• Soft – Low value yields a distinguished border and high value yields a diffused border
• Width – Low value yields a thin border and high value yields a thick border
Border
After selecting this sub-option, the user will then be allowed to fine-tune the border color by adjusting the Luma,
Saturation and Hue values, i.e. Luma, Sat and Hue.
Position
Position allows the user to adjust the centre position of some wipes (e.g Circle & Elipse) . X represents the
horizontal position and Y represents the vertical position.
X Y
Positive value: position the wipe centre to the right
Negative value: position the wipe centre to the left
Zero value: Position the wipe centre at the screen
centre
Positive value: move the wipe centre up
Negative value: move the wipe centre down
Zero value: Position the wipe centre at the screen
centre
Matte
The user is allowed to configure the Matte Luma, Saturation and Hue under this sub-option.