Datavideo SE-600, Быстрый старт

Страница: 8 / 27

7
AUDIO METERS
LED style meters, which show the signal strength at the Audio Output. The
signal they measure is determined by the sources selected by the Audio Bus
selectors and the levels set by the Faders.
These meters show the audio signal level at the Main output. The strength of
any audio signal that is routed to the output will be displayed here. As
mentioned above, these meters play a vital part in correctly setting the audio
levels to avoid clipping or other distortion.
AUDIO MONITOR
Use the Headphone section to accurately monitor any of the sources CH1,
CH 2, AUX
or “Master” output. Repeated presses of the Headphone button
cycle through the monitoring choices. In many cases, headphones may be a
more useful and accurate choice than speakers for audio monitoring.
A+V
When this button is engaged (you’ll know it is engaged because the LED is
lit), the audio associated with a selected input source automatically follows
the video through the dissolve. When the button is inactive, audio must be
switched manually. For more information, see
A+V (Page 10).
LUMA KEY PVW
When this button is engaged, the LUMA key function will display on next
source preview (PST).
LUMA KEY ON
When this button is engaged, the LUMA key function will display on output
(PGM).
PIP 1 / 2 ENABLE
When this button is engaged, the PIP 1/2 function can be display on PST or
PGM.
LOGO 1 / 2 ON
When this button is engaged, the LOGO 1 / 2 will display on PST or PGM.
F1
This button is lock frame. You can lock the video frame on the Main or Sub
Source.
If you want Freezes new video frame, please press F1 button, unlock last
frame picture.
F2
TBD
Transition
16 effect keys, for more information, see Transition Effects (Page 11) .