Datavideo SE-500HD, Инструкция по эксплуатации

Страница: 14 / 30

14
Chapter 3 OSD Menu
The switcher’s OSD menu allows the user to perform several configurations of image effects, such as
picture-in-picture, luma key and etc. The user can also configure the audio settings in the Audio
option. In addition, in the setup option, the user is allowed to set video output resolution, reset to
factory default, and selects the interface language.
3.1 Start
Option Parameters Parameter Value or Range Default Value
Start
Transition Type
MIX
WIPE
Mix
Transition Speed 1-200 frames
60 frames; the duration
in second depends on
the Program OUT
resolution.
WIPE Effect
1. Horizontal
2. Vertical
3. Center
1
WIPE Border Size
OFF
Small
Middle
Large
Small
WIPE Border Color
White
Yellow
Cyan
Green
Magenta
Red
Blue
Black
Red
BKG Color
White
Yellow
Cyan
Green
Magenta
Red
Blue
Black
White
3.1.1 Transition Type
The SE-500HD provides two types of transition effect, which are cross dissolve (MIX) and WIPE. The
default setting is MIX.
3.1.2 Transition Speed
The
Transition Speed
allows the user to set the
MIX
or
WIPE
effect duration, in frames. If the
Transition Speed is set to a value of 60 then the transition will take effect over a period of 1 second if
the progressive video is chosen and 2 seconds if the interlaced video is chosen. When the AUTO
button
is pressed, the transition will take the current
Transition Speed
defined by the user.