Datavideo PTR-10T, Инструкция по эксплуатации

Страница: 26 / 40

26
No. Buttons Descriptions
14
Zoom In / Out
Buttons
Zoom
Press either (T) TELE button to zoom in on the subject such that it
appears to be close to the camera or (W) WIDE button to zoom out
from the subject such that it appears to be far away from the
camera.
15
Zoom Speed Button
(4 speed selection)
Adjust Zoom In/Out Speed
Press button 1/2/3/4 to switch between different speeds with 1
being the highest and 4 being the lowest.
16
Standby Button
Press to enter PTR-10T MARK II into standby mode and press
again to wake the device from standby mode.
OSD Menu
The OSD menu allows you to modify various device settings such as pan and tilt and control
protocols. Press the menu button on your remote control opens the OSD menu shown below.
The table below summarizes the main option items and their sub-options.
Main Options
Set Motor Memory Video Mode Remote Control System Reset P/T Escape
Sub
-O
p
ti
o
n
s
1. P/T
Acceleration 1. Preset
Position 1. Selection
Way 1. PAN/TILT
Reverse
1. Display
1. Reset
Pan/Tilt
2. P/T
Speed
2.Group-1
2. Video
Mode 2. Remote
Source 2. Tally
Light
3. PAN
Torque
3. Group-2
3. HDMI
Mode
3. Set RS-422
3. Model
No.
OSD MENU
1: Set Motor
2: Memory
3: Video Mode
4: Remote Control
5: System
6: Reset P/T
7: Escape