Datavideo PTR-10T, Инструкция по эксплуатации

Страница: 11 / 40

11
9 RS-232/422 OUT
Connects to the camera mounted, relaying serial control signals
between the camera and controllers via RS-232 or RS-422 interface,
which is selectable through the OSD menu .
10 HDBaseT
Connects between PTR-10T and HBT-11 receiver/HS-1600T mobile
switcher. See
HDBaseT for details.
11 Zoom Sensor mini-DIN port
Connects to Datavideo ZEK-1 in order to detect and return zoom
position of the camera mounted. See the
ZEK-1 user manual for
connection instructions.
12 REMOTE
Connect through a remote cable to various camera brands in order
to control camera’s zoom and focus as well as other functions. See
the
REMOTE section for cable pinout information, connection
instructions as well as a list of compatible cameras.
Note: A remote cable (8pin mini-din to 2.5mm phone jack)
accompanying the PTR-10T MARK II is designed for connecting to
various camera brands.
Warning: The 8pin snap-and-lock mini-din connector of the remote
cable will be securely fastened once plugged into the Remote port.
To remove, use two fingers to gently hold the part of the plug
labelled by two arrows then pull the connector outward
.
13 Tally IN
Receives tally information from external devices such as a video
switcher.
14 Tally OUT
Delivers tally information to the mounted camera.
15 IR Receiver
Operate the PTR-10T MARK II by an IR remote control.