Datavideo PTC-140NDIW, Инструкция по эксплуатации

Страница: 42 / 92

42
7.2 Static IP
A static IP address is a fixed address manually assigned to PTC-140NDI. First
uncheck the DHCP checkbox then enter an IP address for the camera, the subnet
mask and the gateway IP.
Note: Never assign an address that ends in .0 or .255 as these addresses are
typically reserved for network protocols. An address to the very start of the IP
pool is also not recommended as it is always reserved for the router.
After you’ve configured the camera’s static IP, click “Save” button to save the
new settings then reboot PTC-140NDI.
7.3 DVIP
DVIP is a special network configuration software tool designed for DVIP device
search on the same network and configuring device network settings such as
Hostname, DHCP mode, IP address, subnet mask, gateway IP, and primary and
secondary DNS.
Depending on your operating system, download DVIP Configuration Tool from
the respective sites listed as follows:
PC: https://www.microsoft.com/en-us/p/dvip-network-
config/9p6gtz839k6s?activetab=pivot%3Aoverviewtab
Android:
https://play.google.com/store/apps/details?id=com.datavideo.dvipnetconfig&hl=
en_US
iOS: https://itunes.apple.com/tw/app/dvip-network-config/id1177895983?mt=8
After you’ve installed the DVIP Network Configuration Tool, follow the steps
outlined below to scan for online DVIP devices and configure their corresponding
settings.