Datavideo PTC-140NDIW, Инструкция по эксплуатации

Страница: 11 / 92

11
the output screen of the PTC-140NDI camera to be auto-recognized by
the NDI compatible receiving devices (e.g. Notebook PC) which are set in
the same local area network.
The DVIP interface allows users to control the PTC-140NDI camera by
the proprietary DVIP protocol which is developed by Datavideo.
3
HDMI OUT
The HDMI OUT allows you to connect an external HDMI monitor via an
HDMI cable.
4
3G-SDI OUT
The 3G-SDI OUT allows you to connect an external monitor via an SDI
cable.
5
Audio IN
The 3.5mm audio input receives external audio.
6
RS-422/RS-485 Interface (RJ-45)
The RS-485 interface serves to connect external RS-422/RS-485 devices.
Use an Ethernet cable to connect external RS-422/RS-485 controllers.
See “
Section 9 Remote Control Port Pinouts ” for making the cable for
the RS-422/RS-485 interface.
Note: To switch between RS-422 and RS-485 communication protocols,
open OSD menu, then go to Setup

RS-485/422 in which you will be
allowed to select the appropriate protocol.
7
RS-232 Interface (RJ-45)
The RS-232 interface connects PTC-140NDI to a remote controller or PC
for control purpose. Use an Ethernet cable to connect external RS-232
controllers. See “
Section 9 Remote Control Port Pinouts ” for making the
cable for the RS-232 interface.