H.264 Network Video Streaming Server
NVS-25
34
Restore Factory default via STM button
The NVS-25 can also be restored to the factory defaults using the STM button located
on the front panel.
Power off the unit
and then press and hold the STM button while
turning on the NVS-25 power; keep pressing the STM button for
40
seconds. After
releasing the STM button, NVS-25 will take another 30 seconds to complete the boot-up
process. Remember to login with default username and password (admin/000000).
14. Recording the stream to USB 2.0 media
The NVS-25 is capable of recording the
streamed video
and audio into an
MPEG2
TS/MPEG-4 file
on a connected USB 2.0 pen drive.
If the video being streamed into NVS-25 is of a High Definition 1080i video format then
the recorded file will use this resolution. If the video being streamed into NVS-25 is of a
Standard Definition NTSC format then the recorded file will adopt this resolution instead.
The USB 2.0 pen drive should be a formatted FAT32
drive
in order to be readable by
NVS-25 to which it is connected. If the USB connected media is incompatible (not
FAT32) or unformatted, the error message will show “
USB storage partition
incorrect.”
The user may choose to format the connected USB drive by clicking on the
“Format USB Storage” button.
15. Status > Device Information
The Status tab displays the device information such as USB storage information and
stream information.
15.1 USB Storage Information
If no USB drive is connected, the message “NO USB Storage plugged” will be displayed
as shown below.
Содержание NVS-25
Страница 1: ......
Страница 10: ...H 264 Network Video Streaming Server NVS 25 10 4 System Diagram ...
Страница 52: ...H 264 Network Video Streaming Server NVS 25 52 Service Support ...