36
Color Correction
If the image from the video source is in need of adjustment the MP6000MD has a built in video processor,
it can adjust the Brightness, Contrast, Color Saturation and Tint (Tint is NTSC only). These settings are
only available with analogue video signals, YUV, SVideo and Composite Video.
To call up the Video Processor Settings start with the LCD display on General Display. Have your video
source playing, so that you can see the image on the TV monitor
Press the Menu button to bring up the Color Correction menu
Press the Enter button and the display will change to the
Brightness setting
To adjust the Brightness press the Enter button again. The LCD
display will change and the Brightness adjustment will appear
on the TV monitor.
LCD Display
OnScreen Adjustment
A reduced value
Use the Left and Right Arrow buttons to
adjust the Brightness – Left reduces the
brightness and Right increase the brightness
An increased value
Once the setting is correct press the Enter button
The LCD Display will change
SAVE should be flashing, press the Enter button and the new value is saved. If SAVE is not flashing use
the Left Arrow button to highlight SAVE so that it is flashing, and then press the Enter button
Press the Enter button to save the new value. Once saved the
Menu will return to 1.Brightness