Datavideo HDBaSet HBT-10, Инструкция по эксплуатации

Страница: 12 / 16

12
resolution of up to 1080p. Select 4K mode
(2160p) if the connection distance is less than 70
meters. If your system is not required to support
resolutions higher than 1080p, you can activate
long reach mode and enjoy longer cable reach of
up to 120 meters.
The DIP Switch is used to select from the
available connection modes listed as follows:
00 : 4K Mode RS-232
01 : 4K Mode RS-422
10 : Long Reach RS-232
11 : Long Reach RS-422
Note : See the Cable Selection section for cable
recommendations.
In addition to HBT-11, you can also connect to any of Datavideo’s
HDBaseT product range in 4K or long reach mode. The table below
provides information about the available connection modes for
connecting to other HDBaseT devices.
Receiver End
HBT-6 HBT-11 HS-1600T MARK II
Trans
m
it
te
r E
nd
H
B
T-
5
4K mode ONLY
(60m@1080p60
or
35m@4K2K30) 4K mode ONLY
(35m@4K2K30)
4K mode ONLY
(60m@1080p60)
H
B
T-
10
4K mode ONLY
(60m@1080p60
or
35m@4K2K30)
Long reach mode
(120m@1080p60)
4K mode
(100m@1080p60
or 70m@4K2K30)
4K mode ONLY
(100m@1080p60)