Datavideo DN-700 Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 36

Datavideo DN-700 Скачать руководство пользователя страница 9

9

How to fit a SATA drive to the removable HE-1 enclosure

Datavideo recommends using 2.5” SATA HDD 7200 RPM with 8 or 16 MB cache. If your unit was
delivered without a hard drive fitted please follow these instructions to fit your drive to an empty HE-1
drive enclosure. Compatible drive information can obtained from your local dealer or Datavideo office.

1. Remove the two small screws from the

connections end of the HE-1 drive
enclosure then remove the PCB.

2. Seat your 2.5” SATA HDD on to the PCB

and then turn it over so you can secure
the drive to the PCB using the four
screws holes provided.

3. Return the PCB, with HDD fitted, to the

enclosure, using the slots within the
enclosure case as a guide.

4. Re-secure the back plate of the

enclosure using the two screws removed
earlier.

5. Push the removable HE-1 enclosure into recorder as shown above. Now turn the locking lever

from right to the left in order to secure the HE-1 in place.

6. You are now ready to switch the unit on.

7. New drives will be formatted within the recorder on first use. The LCD panel will show BIN or

CLIP information once the recorder becomes available for set up and use.

«
...
7
8
9
10
11
...
»

Содержание DN-700





































Отзывы:

Нет отзывов