Dataton WATCHPAX 60, Руководство пользователя

Страница: 8 / 37

InstallatIon and operatIon 8
2. INSTALLATION AND OPERATION
BEFORE USING YOUR WATCHPAX 60
please read the manual thoroughly before operation. always check that the unit has not been dam-
aged in transit when you take delivery.
IMportant: the WatCHpaX 60 is a plug-and-play unit. do not open, modify or repair the unit your-
self. opening, modifying (software or hardware) or repairing the unit yourself willl invalidate the war-
ranty and presents a risk for the user.
SAFETY FIRST
This product must be grounded. Ensure you connect the power plug to a grounded power socket.
•
Insert the power plug all the way in, so it is not loose.
•
do not place the power cord or product near heat sources.
•
Caution: shock hazard if handled carelessly or inaccurately.
•
avoid installing the product in a narrow space with bad ventilation. do not block the ventilation in
any way when operated. always keep front and back of unit clear, minimum 200 mm.
•
Keep the plastic packaging bag for the product in a place that can not be reached by children.
•
do not install the product on an unstable or vibrating surface.
•
Install the unit in a clean, dry area without excessive particles or dust, in the air (preferably in an
air-conditioned server room). do not install the product in a place where it is exposed to high tem-
perature, chemicals, dust, moisture, oil or smoke.
•
take care not to drop the product when moving it.
•
When installing the product on a shelf, ensure the bottom edge of the product does not protrude to
avoid tipping or other potential mishaps.
•
the wall socket should be easily accessible for pluggable equipment.
•
High voltage runs through the product. do not attempt to disassemble, repair, or modify the product on
your own. to move the product, first disconnect all the cables from it.
•
If the product generates a burning smell, or smoke, remove the power cords immediately and contact
dataton.
•
If the product falls, or the exterior is damaged, power off the product, remove the power cords and
contact dataton.
•
If there is a risk of thunderstorm or lightning strike, turn off the power and disconnect all cables.
•
do not insert a metallic object or inflammable object into any opening of the product.
•
Unplug this product from the aC power supply before cleaning. do not use liquid or aerosol clean-
ers on the product. Use a microfiber cloth for cleaning.
•
after storage in cold conditions, let the product adapt to normal temperature for two hours before
powering on.