D T - 6 X X X BiSync to Async ASCII Printer Application U s e r ' s M a n u a l
B u i l d 9 . 0
04/18/06
Datatek Applications Inc.
18
3.17 D
ISPLAY
L
OG
-
DLOG
Syntax: dlog
The
dlog
command is used to display all entries in the log file.
An exclamation point (!) that precedes a log entry denotes new entries. A double asterisk
(**) that precedes a log entry denotes duplicate entries.
3.18 C
LEAR
L
OG
–
CLEAR LOG
Syntax: clear log
The log file can be cleared with the command,
clear log
.
3.19 D
ISPLAY
M
EASUREMENTS
-
DMEAS
Syntax: dmeas
The
dmeas
command is only visible when the application is logged in. The command is used to
display the current measurements on sessions between clients and the host. Only counters,
which are non-zero, shall be displayed.
The per session measurements available are as follows:
Measurement Description
Number of Messages from the Printer to the Host.
Number of Bytes from the Printer to the Host.
Number of Messages from the Host to the Printer.
Number of Bytes from the Host to the Printer.
3.20 C
LEAR
M
EASUREMENTS
-
CLR
Syntax: clr
The measurements displayed with the
dmeas
command are aggregated until cleared. The
clr
command will set all measurements to zero. The command has no arguments.
4 A
P P L I C A T I O N
S
O F T W A R E
I
N S T A L L A T I O N
&
U
P G R A D E
An application may be initially installed, or upgraded, using the
install
command.
Refer to the DT-6XXX Platform User's Manual and refer to the section titled:
Application
Software Installation & Upgrade
