49
Technical Data
Technical Data
3 GHz HF-Synthesizer
HM8135
All data valid at 23 °C after 30 minutes warm-up..
Frequency
Range
1 Hz…3 GHz
Resolution
1 Hz
Settling time
<
10 ms
Frequency Reference 10 MHz
Temperature stability
Standard
TCXO;
Option
OCXO (HO85)
0…50 °C
Aging
≤±0,5 ppm; ≤±1 x 10
-8
≤±1 ppm/year; ≤±1 x 10
-9
/day
Internal reference output
Level
TTL
External reference input
Level
>
0 dBm
Frequency
10 MHz ±20 ppm
Spectral purity (without modulation)
Harmonics
≤-30 dBc (typ. <-35 dBc)
Non-harmonics
≤-50 dBc (>15 kHz from carrier)
Sub-harmonics <2,1 GHz
≤-50 dBc
Sub-harmonics >2,1 GHz
≤-43 dBc (typ. -47 dBc)
Phase noise
(bei 20 kHz from carrier)
f <16 MHz
≤-120 dBc/Hz
16 MHz ≤f <250 MHz
≤-94 dBc/Hz
250 MHz ≤f <500 MHz
≤-105 dBc/Hz
500 MHz ≤f <1.000 MHz
≤-100 dBc/Hz
1 GHz ≤f <2 GHz
≤-95 dBc/Hz
2 GHz ≤f <3 GHz
≤-90 dBc/Hz
Residual FM
typ. <4 Hz; ≤6.5 Hz (in 0.3…3 kHz bandwidth)
Residual AM
typ. <0.06 % (in 0.03…20 kHz bandwidth)
27
Subject to change without notice
H M 8 1 3 5
S p e c i f i c a t i o n s
Specifications
27
Subject to change without notice
H M 8 1 3 5
S p e c i f i c a t i o n s
Specifications
3 GHz RF-Synthesizer HM8135
All data valid at 23 °C after 30 minutes warm-up.
Frequency
Range:
1 Hz…3 GHz
Resolution:
1 Hz
Settling time:
<
10 ms
Frequency Reference 10 MHz
Standard: TCXO
Temperature stability
(0…50 °C):
≤
±0.5 ppm
Aging:
≤
±1 ppm/year
Option:
OCXO (HO85)
Temperature stability
(0…50 °C):
≤
±1x 10
-8
Aging:
≤
±1x 10
-9
/day
Internal reference output:
(rear panel)
Level:
TTL
External reference input:
(rear panel)
Level:
>
0 dBm
Frequency:
10 MHz ±20 ppm
Spectral purity (without modulation)
Harmonics:
≤
-35 dBc
Non-harmonics:
≤
-50 dBc (
>
15 kHz from carrier)
Sub-harmonics:
≤
-50 dBc
Phase noise:
(at 20 kHz from carrier)
f
<
16 MHz:
≤
-120 dBc/Hz
16 MHz
≤
f
<
250 MHz:
≤
-95 dBc/Hz
250 MHz
≤
f
<
500 MHz:
≤
-105 dBc/Hz
500 MHz
≤
f
<
1000 MHz:
≤
-100 dBc/Hz
1 GHz
≤
f
<
2 GHz:
≤
-95 dBc/Hz
2 GHz
≤
f
<
3 GHz:
≤
-90 dBc/Hz
Residual FM:
typ.
<
4 Hz;
≤
6.5 Hz (in 0.3…3 kHz bandwidth)
Residual AM:
typ.
<
0.06 % (in 0.03…20 kHz bandwidth)
(Typical phase noise at 1 GHz)
Output level
Range:
-135…+13 dBm
Resolution:
0.1 dB
Display-Offset for ext. Attn.:
0.0…30.0 dB in 0.1 dB steps
Precision f
<
1.5 GHz; level
>
-120 dBm
for level
>
-57 dBm:
≤
±0.5 dB
for level
<
-57 dBm:
≤
±(0.5 dB + (0.2x (-57 dBm - level))/10)
Precision f
>
1.5 GHz; level
>
-120 dBm
for level
>
-57 dBm:
≤
±0.7 dB
for level
<
-57 dBm:
≤
±(0.7 dB + (0.5x (-57 dBm - level))/10)
Impedance:
50 Ω
V.S.W.R.:
f
≤
1 GHz:
≤
1.5
f
>
1 GHz:
≤
2.5
Modulation sources
Internal:
10 Hz…200 kHz sine wave
10 Hz…20 kHz square wave, triangle, sawtooth
Resolution:
10 Hz
External:
Input on front panel
Impedance:
10 kΩ II 50 pF
Input level:
2 V
pp
for full scale
Coupling:
AC or DC
Output:
Front panel
Level
2 V
pp
Impedance:
1 kΩ
Amplitude modulation (Level
≤
+7 dBm)
Source:
Internal or external
AM-depth:
0…100 %
Resolution:
0.1 %
Accuracy:
±4 % displayed rate ±0.5 %
(AM-depth
≤
80 %, f
mod
≤
50 kHz)
Ext. frequency resp. (to -1 dB):
10 Hz…100 kHz for AC
Distortion:
<
2 % (AM-depth
≤
60 %, f
mod
≤
1 kHz)
<
6 % (AM-depth
≤
80 %, f
mod
<
20 kHz)
Frequency modulation
Source:
internal or external
Deviation:
±200 Hz…400 kHz
(depending on frequency band)
Resolution:
100 Hz
Accuracy:
±3 % + residual FM (f
mod
≤
5 kHz)
±7 % + residual FM (5 kHz
<
f
mod
<
100 kHz)
Ext. frequency response: (to -1 dB):
DC coupling:
0…100 kHz
AC coupling:
100 Hz…100 kHz
Distortion:
<
1 % for deviation
≥
50 kHz at 1 kHz
<
3 % for deviation
≥
10 kHz
Phase modulation
Source:
internal or external
Deviation:
<
16 MHz:
0…3.14 rad
>
16 MHz:
0…10 rad
Resolution:
0.01 rad
Accuracy:
±5 % to 1 kHz + residual PM
Ext. frequency response (to -1dB):
DC coupling:
0…100 kHz
AC coupling:
100 Hz…100 kHz
Distortion:
<
3 % for f
mod
= 1 kHz and deviation = 10 rad
FSK modulation
Range (F0…F1):
16 MHz…3 GHz
Mode:
2 FSK levels
Data source:
external
Max. rate:
10 kbit/s
Shift (F1…F0):
0…10 MHz
Resolution:
100 Hz
Accuracy:
see under FM
PSK modulation
Mode:
2 PSK levels
Data source:
external
Max. rate:
10 kbit/s
Shift (Ph1…Ph0):
<
16 MHz:
0…±3.14 rad
>
16 MHz:
0…±10 rad
Resolution:
0.01 rad
Accuracy:
see under PM
Pulse modulation
Source:
external (rear panel)
Dynamic range:
f
<
2 GHz:
>
80 dB
f
>
2 GHz:
>
55 dB
Rise/fall times:
<
50 ns (typ.
<
10 ns)
Delay:
<
100 ns
Max. frequency:
2.5 MHz (typ. 5 MHz)
Input level:
TTL
Sweep mode
Range:
1…3000 MHz
Depth:
500 Hz…2999 MHz
Sweep time:
20 ms…5 s
Trigger:
internal
Protective functions
The synthesizer is protected against reverse power applied on RF output
up to 1 W for a 50 Ω source and against any DC source up to ±7 V. The pro-
tection disconnects the output until manually reset by operator.
Miscellaneous
Interfaces:
USB/RS-232 (HO820), IEEE-488 (option)
Configuration memories:
10
Safety class:
Safety Class I (EN61010-1)
Power supply:
115…230 V ±10 %, 50/60 Hz, CAT II
Power consumption:
approx. 40 VA
Operating temperature:
+5…+40 °C
Storage temperature:
-20…+70 °C
Rel. humidity:
5…80 % (non condensing)
HM8135E/010611 · C&E · Subject to change without notice · © HAMEG Instruments GmbH
®
· DQS-certified in accordance with DIN EN ISO 9001:2008, Reg.-No.: 071040 QM08
HAMEG Instruments GmbH · Industriestr. 6 · D-63533 Mainhausen · Tel +49 (0) 6182 8000 · Fax +49 (0) 6182 800100 · www.hameg.com · info
@
hameg.com
Dimensions
(W x H x D)
:
285 x 75 x 365 mm
Weight:
approx. 5 kg
Accessories supplied:
Line cord, Operating manual
Recommended accessories:
HO85
OCXO temperature stability ±1x 10
-8
HO880 IEEE-488 (GPIB) Interface (galvanically isolated)
HZ13
Interface cable (USB) 1.8 m
HZ14
Interface cable (serial) 1:1
HZ20
Adapter, BNC to 4 mm banana
HZ21
Adapter plug
HZ24
Attenuator Set 50 Ω (3/6/10/20 dB)
HZ33
Test Cable 50 Ω (BNC-BNC) 0.5 m
HZ34
Test Cable 50 Ω (BNC-BNC) 1.0 m
HZ42
19’’ Rackmount kit 2RU
HZ72
GPIB-Cable 2 m
3 GHz RF-Synthesizer HM8135
All data valid at 23 °C after 30 minutes warm-up.
Frequency
Range:
1 Hz…3 GHz
Resolution:
1 Hz
Settling time:
<
10 ms
Frequency Reference 10 MHz
Standard: TCXO
Temperature stability
(0…50 °C):
≤
±0.5 ppm
Aging:
≤
±1 ppm/year
Option:
OCXO (HO85)
Temperature stability
(0…50 °C):
≤
±1x 10
-8
Aging:
≤
±1x 10
-9
/day
Internal reference output:
(rear panel)
Level:
TTL
External reference input:
(rear panel)
Level:
>
0 dBm
Frequency:
10 MHz ±20 ppm
Spectral purity (without modulation)
Harmonics:
≤
-35 dBc
Non-harmonics:
≤
-50 dBc (
>
15 kHz from carrier)
Sub-harmonics:
≤
-50 dBc
Phase noise:
(at 20 kHz from carrier)
f
<
16 MHz:
≤
-120 dBc/Hz
16 MHz
≤
f
<
250 MHz:
≤
-95 dBc/Hz
250 MHz
≤
f
<
500 MHz:
≤
-105 dBc/Hz
500 MHz
≤
f
<
1000 MHz:
≤
-100 dBc/Hz
1 GHz
≤
f
<
2 GHz:
≤
-95 dBc/Hz
2 GHz
≤
f
<
3 GHz:
≤
-90 dBc/Hz
Residual FM:
typ.
<
4 Hz;
≤
6.5 Hz (in 0.3…3 kHz bandwidth)
Residual AM:
typ.
<
0.06 % (in 0.03…20 kHz bandwidth)
(Typical phase noise at 1 GHz)
Output level
Range:
-135…+13 dBm
Resolution:
0.1 dB
Display-Offset for ext. Attn.:
0.0…30.0 dB in 0.1 dB steps
Precision f
<
1.5 GHz; level
>
-120 dBm
for level
>
-57 dBm:
≤
±0.5 dB
for level
<
-57 dBm:
≤
±(0.5 dB + (0.2x (-57 dBm - level))/10)
Precision f
>
1.5 GHz; level
>
-120 dBm
for level
>
-57 dBm:
≤
±0.7 dB
for level
<
-57 dBm:
≤
±(0.7 dB + (0.5x (-57 dBm - level))/10)
Impedance:
50 Ω
V.S.W.R.:
f
≤
1 GHz:
≤
1.5
f
>
1 GHz:
≤
2.5
Modulation sources
Internal:
10 Hz…200 kHz sine wave
10 Hz…20 kHz square wave, triangle, sawtooth
Resolution:
10 Hz
External:
Input on front panel
Impedance:
10 kΩ II 50 pF
Input level:
2 V
pp
for full scale
Coupling:
AC or DC
Output:
Front panel
Level
2 V
pp
Impedance:
1 kΩ
Amplitude modulation (Level
≤
+7 dBm)
Source:
Internal or external
AM-depth:
0…100 %
Resolution:
0.1 %
Accuracy:
±4 % displayed rate ±0.5 %
(AM-depth
≤
80 %, f
mod
≤
50 kHz)
Ext. frequency resp. (to -1 dB):
10 Hz…100 kHz for AC
Distortion:
<
2 % (AM-depth
≤
60 %, f
mod
≤
1 kHz)
<
6 % (AM-depth
≤
80 %, f
mod
<
20 kHz)
Frequency modulation
Source:
internal or external
Deviation:
±200 Hz…400 kHz
(depending on frequency band)
Resolution:
100 Hz
Accuracy:
±3 % + residual FM (f
mod
≤
5 kHz)
±7 % + residual FM (5 kHz
<
f
mod
<
100 kHz)
Ext. frequency response: (to -1 dB):
DC coupling:
0…100 kHz
AC coupling:
100 Hz…100 kHz
Distortion:
<
1 % for deviation
≥
50 kHz at 1 kHz
<
3 % for deviation
≥
10 kHz
Phase modulation
Source:
internal or external
Deviation:
<
16 MHz:
0…3.14 rad
>
16 MHz:
0…10 rad
Resolution:
0.01 rad
Accuracy:
±5 % to 1 kHz + residual PM
Ext. frequency response (to -1dB):
DC coupling:
0…100 kHz
AC coupling:
100 Hz…100 kHz
Distortion:
<
3 % for f
mod
= 1 kHz and deviation = 10 rad
FSK modulation
Range (F0…F1):
16 MHz…3 GHz
Mode:
2 FSK levels
Data source:
external
Max. rate:
10 kbit/s
Shift (F1…F0):
0…10 MHz
Resolution:
100 Hz
Accuracy:
see under FM
PSK modulation
Mode:
2 PSK levels
Data source:
external
Max. rate:
10 kbit/s
Shift (Ph1…Ph0):
<
16 MHz:
0…±3.14 rad
>
16 MHz:
0…±10 rad
Resolution:
0.01 rad
Accuracy:
see under PM
Pulse modulation
Source:
external (rear panel)
Dynamic range:
f
<
2 GHz:
>
80 dB
f
>
2 GHz:
>
55 dB
Rise/fall times:
<
50 ns (typ.
<
10 ns)
Delay:
<
100 ns
Max. frequency:
2.5 MHz (typ. 5 MHz)
Input level:
TTL
Sweep mode
Range:
1…3000 MHz
Depth:
500 Hz…2999 MHz
Sweep time:
20 ms…5 s
Trigger:
internal
Protective functions
The synthesizer is protected against reverse power applied on RF output
up to 1 W for a 50 Ω source and against any DC source up to ±7 V. The pro-
tection disconnects the output until manually reset by operator.
Miscellaneous
Interfaces:
USB/RS-232 (HO820), IEEE-488 (option)
Configuration memories:
10
Safety class:
Safety Class I (EN61010-1)
Power supply:
115…230 V ±10 %, 50/60 Hz, CAT II
Power consumption:
approx. 40 VA
Operating temperature:
+5…+40 °C
Storage temperature:
-20…+70 °C
Rel. humidity:
5…80 % (non condensing)
3 GHz RF-Synthesizer HM8135
All data valid at 23 °C after 30 minutes warm-up.
Frequency
Range:
1 Hz…3 GHz
Resolution:
1 Hz
Settling time:
<
10 ms
Frequency Reference 10 MHz
Standard: TCXO
Temperature stability
(0…50 °C):
≤
±0.5 ppm
Aging:
≤
±1 ppm/year
Option:
OCXO (HO85)
Temperature stability
(0…50 °C):
≤
±1x 10
-8
Aging:
≤
±1x 10
-9
/day
Internal reference output:
(rear panel)
Level:
TTL
External reference input:
(rear panel)
Level:
>
0 dBm
Frequency:
10 MHz ±20 ppm
Spectral purity (without modulation)
Harmonics:
≤
-35 dBc
Non-harmonics:
≤
-50 dBc (
>
15 kHz from carrier)
Sub-harmonics:
≤
-50 dBc
Phase noise:
(at 20 kHz from carrier)
f
<
16 MHz:
≤
-120 dBc/Hz
16 MHz
≤
f
<
250 MHz:
≤
-95 dBc/Hz
250 MHz
≤
f
<
500 MHz:
≤
-105 dBc/Hz
500 MHz
≤
f
<
1000 MHz:
≤
-100 dBc/Hz
1 GHz
≤
f
<
2 GHz:
≤
-95 dBc/Hz
2 GHz
≤
f
<
3 GHz:
≤
-90 dBc/Hz
Residual FM:
typ.
<
4 Hz;
≤
6.5 Hz (in 0.3…3 kHz bandwidth)
Residual AM:
typ.
<
0.06 % (in 0.03…20 kHz bandwidth)
(Typical phase noise at 1 GHz)
Output level
Range:
-135…+13 dBm
Resolution:
0.1 dB
Display-Offset for ext. Attn.:
0.0…30.0 dB in 0.1 dB steps
Precision f
<
1.5 GHz; level
>
-120 dBm
for level
>
-57 dBm:
≤
±0.5 dB
for level
<
-57 dBm:
≤
±(0.5 dB + (0.2x (-57 dBm - level))/10)
Precision f
>
1.5 GHz; level
>
-120 dBm
for level
>
-57 dBm:
≤
±0.7 dB
for level
<
-57 dBm:
≤
±(0.7 dB + (0.5x (-57 dBm - level))/10)
Impedance:
50 Ω
V.S.W.R.:
f
≤
1 GHz:
≤
1.5
f
>
1 GHz:
≤
2.5
Modulation sources
Internal:
10 Hz…200 kHz sine wave
10 Hz…20 kHz square wave, triangle, sawtooth
Resolution:
10 Hz
External:
Input on front panel
Impedance:
10 kΩ II 50 pF
Input level:
2 V
pp
for full scale
Coupling:
AC or DC
Output:
Front panel
Level
2 V
pp
Impedance:
1 kΩ
Amplitude modulation (Level
≤
+7 dBm)
Source:
Internal or external
AM-depth:
0…100 %
Resolution:
0.1 %
Accuracy:
±4 % displayed rate ±0.5 %
(AM-depth
≤
80 %, f
mod
≤
50 kHz)
Ext. frequency resp. (to -1 dB):
10 Hz…100 kHz for AC
Distortion:
<
2 % (AM-depth
≤
60 %, f
mod
≤
1 kHz)
<
6 % (AM-depth
≤
80 %, f
mod
<
20 kHz)
Frequency modulation
Source:
internal or external
Deviation:
±200 Hz…400 kHz
(depending on frequency band)
Resolution:
100 Hz
Accuracy:
±3 % + residual FM (f
mod
≤
5 kHz)
±7 % + residual FM (5 kHz
<
f
mod
<
100 kHz)
Ext. frequency response: (to -1 dB):
DC coupling:
0…100 kHz
AC coupling:
100 Hz…100 kHz
Distortion:
<
1 % for deviation
≥
50 kHz at 1 kHz
<
3 % for deviation
≥
10 kHz
Phase modulation
Source:
internal or external
Deviation:
<
16 MHz:
0…3.14 rad
>
16 MHz:
0…10 rad
Resolution:
0.01 rad
Accuracy:
±5 % to 1 kHz + residual PM
Ext. frequency response (to -1dB):
DC coupling:
0…100 kHz
AC coupling:
100 Hz…100 kHz
Distortion:
<
3 % for f
mod
= 1 kHz and deviation = 10 rad
FSK modulation
Range (F0…F1):
16 MHz…3 GHz
Mode:
2 FSK levels
Data source:
external
Max. rate:
10 kbit/s
Shift (F1…F0):
0…10 MHz
Resolution:
100 Hz
Accuracy:
see under FM
PSK modulation
Mode:
2 PSK levels
Data source:
external
Max. rate:
10 kbit/s
Shift (Ph1…Ph0):
<
16 MHz:
0…±3.14 rad
>
16 MHz:
0…±10 rad
Resolution:
0.01 rad
Accuracy:
see under PM
Pulse modulation
Source:
external (rear panel)
Dynamic range:
f
<
2 GHz:
>
80 dB
f
>
2 GHz:
>
55 dB
Rise/fall times:
<
50 ns (typ.
<
10 ns)
Delay:
<
100 ns
Max. frequency:
2.5 MHz (typ. 5 MHz)
Input level:
TTL
Sweep mode
Range:
1…3000 MHz
Depth:
500 Hz…2999 MHz
Sweep time:
20 ms…5 s
Trigger:
internal
Protective functions
The synthesizer is protected against reverse power applied on RF output
up to 1 W for a 50 Ω source and against any DC source up to ±7 V. The pro-
tection disconnects the output until manually reset by operator.
Miscellaneous
Interfaces:
USB/RS-232 (HO820), IEEE-488 (option)
Configuration memories:
10
Safety class:
Safety Class I (EN61010-1)
Power supply:
115…230 V ±10 %, 50/60 Hz, CAT II
Power consumption:
approx. 40 VA
Operating temperature:
+5…+40 °C
Storage temperature:
-20…+70 °C
Rel. humidity:
5…80 % (non condensing)
3 GHz RF-Synthesizer HM8135
All data valid at 23 °C after 30 minutes warm-up.
Frequency
Range:
1 Hz…3 GHz
Resolution:
1 Hz
Settling time:
<
10 ms
Frequency Reference 10 MHz
Standard: TCXO
Temperature stability
(0…50 °C):
≤
±0.5 ppm
Aging:
≤
±1 ppm/year
Option:
OCXO (HO85)
Temperature stability
(0…50 °C):
≤
±1x 10
-8
Aging:
≤
±1x 10
-9
/day
Internal reference output:
(rear panel)
Level:
TTL
External reference input:
(rear panel)
Level:
>
0 dBm
Frequency:
10 MHz ±20 ppm
Spectral purity (without modulation)
Harmonics:
≤
-35 dBc
Non-harmonics:
≤
-50 dBc (
>
15 kHz from carrier)
Sub-harmonics:
≤
-50 dBc
Phase noise:
(at 20 kHz from carrier)
f
<
16 MHz:
≤
-120 dBc/Hz
16 MHz
≤
f
<
250 MHz:
≤
-95 dBc/Hz
250 MHz
≤
f
<
500 MHz:
≤
-105 dBc/Hz
500 MHz
≤
f
<
1000 MHz:
≤
-100 dBc/Hz
1 GHz
≤
f
<
2 GHz:
≤
-95 dBc/Hz
2 GHz
≤
f
<
3 GHz:
≤
-90 dBc/Hz
Residual FM:
typ.
<
4 Hz;
≤
6.5 Hz (in 0.3…3 kHz bandwidth)
Residual AM:
typ.
<
0.06 % (in 0.03…20 kHz bandwidth)
(Typical phase noise at 1 GHz)
Output level
Range:
-135…+13 dBm
Resolution:
0.1 dB
Display-Offset for ext. Attn.:
0.0…30.0 dB in 0.1 dB steps
Precision f
<
1.5 GHz; level
>
-120 dBm
for level
>
-57 dBm:
≤
±0.5 dB
for level
<
-57 dBm:
≤
±(0.5 dB + (0.2x (-57 dBm - level))/10)
Precision f
>
1.5 GHz; level
>
-120 dBm
for level
>
-57 dBm:
≤
±0.7 dB
for level
<
-57 dBm:
≤
±(0.7 dB + (0.5x (-57 dBm - level))/10)
Impedance:
50 Ω
V.S.W.R.:
f
≤
1 GHz:
≤
1.5
f
>
1 GHz:
≤
2.5
Modulation sources
Internal:
10 Hz…200 kHz sine wave
10 Hz…20 kHz square wave, triangle, sawtooth
Resolution:
10 Hz
External:
Input on front panel
Impedance:
10 kΩ II 50 pF
Input level:
2 V
pp
for full scale
Coupling:
AC or DC
Output:
Front panel
Level
2 V
pp
Impedance:
1 kΩ
Amplitude modulation (Level
≤
+7 dBm)
Source:
Internal or external
AM-depth:
0…100 %
Resolution:
0.1 %
Accuracy:
±4 % displayed rate ±0.5 %
(AM-depth
≤
80 %, f
mod
≤
50 kHz)
Ext. frequency resp. (to -1 dB):
10 Hz…100 kHz for AC
Distortion:
<
2 % (AM-depth
≤
60 %, f
mod
≤
1 kHz)
<
6 % (AM-depth
≤
80 %, f
mod
<
20 kHz)
Frequency modulation
Source:
internal or external
Deviation:
±200 Hz…400 kHz
(depending on frequency band)
Resolution:
100 Hz
Accuracy:
±3 % + residual FM (f
mod
≤
5 kHz)
±7 % + residual FM (5 kHz
<
f
mod
<
100 kHz)
Ext. frequency response: (to -1 dB):
DC coupling:
0…100 kHz
AC coupling:
100 Hz…100 kHz
Distortion:
<
1 % for deviation
≥
50 kHz at 1 kHz
<
3 % for deviation
≥
10 kHz
Phase modulation
Source:
internal or external
Deviation:
<
16 MHz:
0…3.14 rad
>
16 MHz:
0…10 rad
Resolution:
0.01 rad
Accuracy:
±5 % to 1 kHz + residual PM
Ext. frequency response (to -1dB):
DC coupling:
0…100 kHz
AC coupling:
100 Hz…100 kHz
Distortion:
<
3 % for f
mod
= 1 kHz and deviation = 10 rad
FSK modulation
Range (F0…F1):
16 MHz…3 GHz
Mode:
2 FSK levels
Data source:
external
Max. rate:
10 kbit/s
Shift (F1…F0):
0…10 MHz
Resolution:
100 Hz
Accuracy:
see under FM
PSK modulation
Mode:
2 PSK levels
Data source:
external
Max. rate:
10 kbit/s
Shift (Ph1…Ph0):
<
16 MHz:
0…±3.14 rad
>
16 MHz:
0…±10 rad
Resolution:
0.01 rad
Accuracy:
see under PM
Pulse modulation
Source:
external (rear panel)
Dynamic range:
f
<
2 GHz:
>
80 dB
f
>
2 GHz:
>
55 dB
Rise/fall times:
<
50 ns (typ.
<
10 ns)
Delay:
<
100 ns
Max. frequency:
2.5 MHz (typ. 5 MHz)
Input level:
TTL
Sweep mode
Range:
1…3000 MHz
Depth:
500 Hz…2999 MHz
Sweep time:
20 ms…5 s
Trigger:
internal
Protective functions
The synthesizer is protected against reverse power applied on RF output
up to 1 W for a 50 Ω source and against any DC source up to ±7 V. The pro-
tection disconnects the output until manually reset by operator.
Miscellaneous
Interfaces:
USB/RS-232 (HO820), IEEE-488 (option)
Configuration memories:
10
Safety class:
Safety Class I (EN61010-1)
Power supply:
115…230 V ±10 %, 50/60 Hz, CAT II
Power consumption:
approx. 40 VA
Operating temperature:
+5…+40 °C
Storage temperature:
-20…+70 °C
Rel. humidity:
5…80 % (non condensing)
3 GHz RF-Synthesizer HM8135
All data valid at 23 °C after 30 minutes warm-up.
Frequency
Range:
1 Hz…3 GHz
Resolution:
1 Hz
Settling time:
<
10 ms
Frequency Reference 10 MHz
Standard: TCXO
Temperature stability
(0…50 °C):
≤
±0.5 ppm
Aging:
≤
±1 ppm/year
Option:
OCXO (HO85)
Temperature stability
(0…50 °C):
≤
±1x 10
-8
Aging:
≤
±1x 10
-9
/day
Internal reference output:
(rear panel)
Level:
TTL
External reference input:
(rear panel)
Level:
>
0 dBm
Frequency:
10 MHz ±20 ppm
Spectral purity (without modulation)
Harmonics:
≤
-35 dBc
Non-harmonics:
≤
-50 dBc (
>
15 kHz from carrier)
Sub-harmonics:
≤
-50 dBc
Phase noise:
(at 20 kHz from carrier)
f
<
16 MHz:
≤
-120 dBc/Hz
16 MHz
≤
f
<
250 MHz:
≤
-95 dBc/Hz
250 MHz
≤
f
<
500 MHz:
≤
-105 dBc/Hz
500 MHz
≤
f
<
1000 MHz:
≤
-100 dBc/Hz
1 GHz
≤
f
<
2 GHz:
≤
-95 dBc/Hz
2 GHz
≤
f
<
3 GHz:
≤
-90 dBc/Hz
Residual FM:
typ.
<
4 Hz;
≤
6.5 Hz (in 0.3…3 kHz bandwidth)
Residual AM:
typ.
<
0.06 % (in 0.03…20 kHz bandwidth)
(Typical phase noise at 1 GHz)
Output level
Range:
-135…+13 dBm
Resolution:
0.1 dB
Display-Offset for ext. Attn.:
0.0…30.0 dB in 0.1 dB steps
Precision f
<
1.5 GHz; level
>
-120 dBm
for level
>
-57 dBm:
≤
±0.5 dB
for level
<
-57 dBm:
≤
±(0.5 dB + (0.2x (-57 dBm - level))/10)
Precision f
>
1.5 GHz; level
>
-120 dBm
for level
>
-57 dBm:
≤
±0.7 dB
for level
<
-57 dBm:
≤
±(0.7 dB + (0.5x (-57 dBm - level))/10)
Impedance:
50 Ω
V.S.W.R.:
f
≤
1 GHz:
≤
1.5
f
>
1 GHz:
≤
2.5
Modulation sources
Internal:
10 Hz…200 kHz sine wave
10 Hz…20 kHz square wave, triangle, sawtooth
Resolution:
10 Hz
External:
Input on front panel
Impedance:
10 kΩ II 50 pF
Input level:
2 V
pp
for full scale
Coupling:
AC or DC
Output:
Front panel
Level
2 V
pp
Impedance:
1 kΩ
Amplitude modulation (Level
≤
+7 dBm)
Source:
Internal or external
AM-depth:
0…100 %
Resolution:
0.1 %
Accuracy:
±4 % displayed rate ±0.5 %
(AM-depth
≤
80 %, f
mod
≤
50 kHz)
Ext. frequency resp. (to -1 dB):
10 Hz…100 kHz for AC
Distortion:
<
2 % (AM-depth
≤
60 %, f
mod
≤
1 kHz)
<
6 % (AM-depth
≤
80 %, f
mod
<
20 kHz)
Frequency modulation
Source:
internal or external
Deviation:
±200 Hz…400 kHz
(depending on frequency band)
Resolution:
100 Hz
Accuracy:
±3 % + residual FM (f
mod
≤
5 kHz)
±7 % + residual FM (5 kHz
<
f
mod
<
100 kHz)
Ext. frequency response: (to -1 dB):
DC coupling:
0…100 kHz
AC coupling:
100 Hz…100 kHz
Distortion:
<
1 % for deviation
≥
50 kHz at 1 kHz
<
3 % for deviation
≥
10 kHz
Phase modulation
Source:
internal or external
Deviation:
<
16 MHz:
0…3.14 rad
>
16 MHz:
0…10 rad
Resolution:
0.01 rad
Accuracy:
±5 % to 1 kHz + residual PM
Ext. frequency response (to -1dB):
DC coupling:
0…100 kHz
AC coupling:
100 Hz…100 kHz
Distortion:
<
3 % for f
mod
= 1 kHz and deviation = 10 rad
FSK modulation
Range (F0…F1):
16 MHz…3 GHz
Mode:
2 FSK levels
Data source:
external
Max. rate:
10 kbit/s
Shift (F1…F0):
0…10 MHz
Resolution:
100 Hz
Accuracy:
see under FM
PSK modulation
Mode:
2 PSK levels
Data source:
external
Max. rate:
10 kbit/s
Shift (Ph1…Ph0):
<
16 MHz:
0…±3.14 rad
>
16 MHz:
0…±10 rad
Resolution:
0.01 rad
Accuracy:
see under PM
Pulse modulation
Source:
external (rear panel)
Dynamic range:
f
<
2 GHz:
>
80 dB
f
>
2 GHz:
>
55 dB
Rise/fall times:
<
50 ns (typ.
<
10 ns)
Delay:
<
100 ns
Max. frequency:
2.5 MHz (typ. 5 MHz)
Input level:
TTL
Sweep mode
Range:
1…3000 MHz
Depth:
500 Hz…2999 MHz
Sweep time:
20 ms…5 s
Trigger:
internal
Protective functions
The synthesizer is protected against reverse power applied on RF output
up to 1 W for a 50 Ω source and against any DC source up to ±7 V. The pro-
tection disconnects the output until manually reset by operator.
Miscellaneous
Interfaces:
USB/RS-232 (HO820), IEEE-488 (option)
Configuration memories:
10
Safety class:
Safety Class I (EN61010-1)
Power supply:
115…230 V ±10 %, 50/60 Hz, CAT II
Power consumption:
approx. 40 VA
Operating temperature:
+5…+40 °C
Storage temperature:
-20…+70 °C
Rel. humidity:
5…80 % (non condensing)
3 GHz RF-Synthesizer HM8135
All data valid at 23 °C after 30 minutes warm-up.
Frequency
Range:
1 Hz…3 GHz
Resolution:
1 Hz
Settling time:
<
10 ms
Frequency Reference 10 MHz
Standard: TCXO
Temperature stability
(0…50 °C):
≤
±0.5 ppm
Aging:
≤
±1 ppm/year
Option:
OCXO (HO85)
Temperature stability
(0…50 °C):
≤
±1x 10
-8
Aging:
≤
±1x 10
-9
/day
Internal reference output:
(rear panel)
Level:
TTL
External reference input:
(rear panel)
Level:
>
0 dBm
Frequency:
10 MHz ±20 ppm
Spectral purity (without modulation)
Harmonics:
≤
-35 dBc
Non-harmonics:
≤
-50 dBc (
>
15 kHz from carrier)
Sub-harmonics:
≤
-50 dBc
Phase noise:
(at 20 kHz from carrier)
f
<
16 MHz:
≤
-120 dBc/Hz
16 MHz
≤
f
<
250 MHz:
≤
-95 dBc/Hz
250 MHz
≤
f
<
500 MHz:
≤
-105 dBc/Hz
500 MHz
≤
f
<
1000 MHz:
≤
-100 dBc/Hz
1 GHz
≤
f
<
2 GHz:
≤
-95 dBc/Hz
2 GHz
≤
f
<
3 GHz:
≤
-90 dBc/Hz
Residual FM:
typ.
<
4 Hz;
≤
6.5 Hz (in 0.3…3 kHz bandwidth)
Residual AM:
typ.
<
0.06 % (in 0.03…20 kHz bandwidth)
(Typical phase noise at 1 GHz)
Output level
Range:
-135…+13 dBm
Resolution:
0.1 dB
Display-Offset for ext. Attn.:
0.0…30.0 dB in 0.1 dB steps
Precision f
<
1.5 GHz; level
>
-120 dBm
for level
>
-57 dBm:
≤
±0.5 dB
for level
<
-57 dBm:
≤
±(0.5 dB + (0.2x (-57 dBm - level))/10)
Precision f
>
1.5 GHz; level
>
-120 dBm
for level
>
-57 dBm:
≤
±0.7 dB
for level
<
-57 dBm:
≤
±(0.7 dB + (0.5x (-57 dBm - level))/10)
Impedance:
50 Ω
V.S.W.R.:
f
≤
1 GHz:
≤
1.5
f
>
1 GHz:
≤
2.5
Modulation sources
Internal:
10 Hz…200 kHz sine wave
10 Hz…20 kHz square wave, triangle, sawtooth
Resolution:
10 Hz
External:
Input on front panel
Impedance:
10 kΩ II 50 pF
Input level:
2 V
pp
for full scale
Coupling:
AC or DC
Output:
Front panel
Level
2 V
pp
Impedance:
1 kΩ
Amplitude modulation (Level
≤
+7 dBm)
Source:
Internal or external
AM-depth:
0…100 %
Resolution:
0.1 %
Accuracy:
±4 % displayed rate ±0.5 %
(AM-depth
≤
80 %, f
mod
≤
50 kHz)
Ext. frequency resp. (to -1 dB):
10 Hz…100 kHz for AC
Distortion:
<
2 % (AM-depth
≤
60 %, f
mod
≤
1 kHz)
<
6 % (AM-depth
≤
80 %, f
mod
<
20 kHz)
Frequency modulation
Source:
internal or external
Deviation:
±200 Hz…400 kHz
(depending on frequency band)
Resolution:
100 Hz
Accuracy:
±3 % + residual FM (f
mod
≤
5 kHz)
±7 % + residual FM (5 kHz
<
f
mod
<
100 kHz)
Ext. frequency response: (to -1 dB):
DC coupling:
0…100 kHz
AC coupling:
100 Hz…100 kHz
Distortion:
<
1 % for deviation
≥
50 kHz at 1 kHz
<
3 % for deviation
≥
10 kHz
Phase modulation
Source:
internal or external
Deviation:
<
16 MHz:
0…3.14 rad
>
16 MHz:
0…10 rad
Resolution:
0.01 rad
Accuracy:
±5 % to 1 kHz + residual PM
Ext. frequency response (to -1dB):
DC coupling:
0…100 kHz
AC coupling:
100 Hz…100 kHz
Distortion:
<
3 % for f
mod
= 1 kHz and deviation = 10 rad
FSK modulation
Range (F0…F1):
16 MHz…3 GHz
Mode:
2 FSK levels
Data source:
external
Max. rate:
10 kbit/s
Shift (F1…F0):
0…10 MHz
Resolution:
100 Hz
Accuracy:
see under FM
PSK modulation
Mode:
2 PSK levels
Data source:
external
Max. rate:
10 kbit/s
Shift (Ph1…Ph0):
<
16 MHz:
0…±3.14 rad
>
16 MHz:
0…±10 rad
Resolution:
0.01 rad
Accuracy:
see under PM
Pulse modulation
Source:
external (rear panel)
Dynamic range:
f
<
2 GHz:
>
80 dB
f
>
2 GHz:
>
55 dB
Rise/fall times:
<
50 ns (typ.
<
10 ns)
Delay:
<
100 ns
Max. frequency:
2.5 MHz (typ. 5 MHz)
Input level:
TTL
Sweep mode
Range:
1…3000 MHz
Depth:
500 Hz…2999 MHz
Sweep time:
20 ms…5 s
Trigger:
internal
Protective functions
The synthesizer is protected against reverse power applied on RF output
up to 1 W for a 50 Ω source and against any DC source up to ±7 V. The pro-
tection disconnects the output until manually reset by operator.
Miscellaneous
Interfaces:
USB/RS-232 (HO820), IEEE-488 (option)
Configuration memories:
10
Safety class:
Safety Class I (EN61010-1)
Power supply:
115…230 V ±10 %, 50/60 Hz, CAT II
Power consumption:
approx. 40 VA
Operating temperature:
+5…+40 °C
Storage temperature:
-20…+70 °C
Rel. humidity:
5…80 % (non condensing)
3 GHz RF-Synthesizer HM8135
All data valid at 23 °C after 30 minutes warm-up.
Frequency
Range:
1 Hz…3 GHz
Resolution:
1 Hz
Settling time:
<
10 ms
Frequency Reference 10 MHz
Standard: TCXO
Temperature stability
(0…50 °C):
≤
±0.5 ppm
Aging:
≤
±1 ppm/year
Option:
OCXO (HO85)
Temperature stability
(0…50 °C):
≤
±1x 10
-8
Aging:
≤
±1x 10
-9
/day
Internal reference output:
(rear panel)
Level:
TTL
External reference input:
(rear panel)
Level:
>
0 dBm
Frequency:
10 MHz ±20 ppm
Spectral purity (without modulation)
Harmonics:
≤
-35 dBc
Non-harmonics:
≤
-50 dBc (
>
15 kHz from carrier)
Sub-harmonics:
≤
-50 dBc
Phase noise:
(at 20 kHz from carrier)
f
<
16 MHz:
≤
-120 dBc/Hz
16 MHz
≤
f
<
250 MHz:
≤
-95 dBc/Hz
250 MHz
≤
f
<
500 MHz:
≤
-105 dBc/Hz
500 MHz
≤
f
<
1000 MHz:
≤
-100 dBc/Hz
1 GHz
≤
f
<
2 GHz:
≤
-95 dBc/Hz
2 GHz
≤
f
<
3 GHz:
≤
-90 dBc/Hz
Residual FM:
typ.
<
4 Hz;
≤
6.5 Hz (in 0.3…3 kHz bandwidth)
Residual AM:
typ.
<
0.06 % (in 0.03…20 kHz bandwidth)
(Typical phase noise at 1 GHz)
Output level
Range:
-135…+13 dBm
Resolution:
0.1 dB
Display-Offset for ext. Attn.:
0.0…30.0 dB in 0.1 dB steps
Precision f
<
1.5 GHz; level
>
-120 dBm
for level
>
-57 dBm:
≤
±0.5 dB
for level
<
-57 dBm:
≤
±(0.5 dB + (0.2x (-57 dBm - level))/10)
Precision f
>
1.5 GHz; level
>
-120 dBm
for level
>
-57 dBm:
≤
±0.7 dB
for level
<
-57 dBm:
≤
±(0.7 dB + (0.5x (-57 dBm - level))/10)
Impedance:
50 Ω
V.S.W.R.:
f
≤
1 GHz:
≤
1.5
f
>
1 GHz:
≤
2.5
Modulation sources
Internal:
10 Hz…200 kHz sine wave
10 Hz…20 kHz square wave, triangle, sawtooth
Resolution:
10 Hz
External:
Input on front panel
Impedance:
10 kΩ II 50 pF
Input level:
2 V
pp
for full scale
Coupling:
AC or DC
Output:
Front panel
Level
2 V
pp
Impedance:
1 kΩ
Amplitude modulation (Level
≤
+7 dBm)
Source:
Internal or external
AM-depth:
0…100 %
Resolution:
0.1 %
Accuracy:
±4 % displayed rate ±0.5 %
(AM-depth
≤
80 %, f
mod
≤
50 kHz)
Ext. frequency resp. (to -1 dB):
10 Hz…100 kHz for AC
Distortion:
<
2 % (AM-depth
≤
60 %, f
mod
≤
1 kHz)
<
6 % (AM-depth
≤
80 %, f
mod
<
20 kHz)
Frequency modulation
Source:
internal or external
Deviation:
±200 Hz…400 kHz
(depending on frequency band)
Resolution:
100 Hz
Accuracy:
±3 % + residual FM (f
mod
≤
5 kHz)
±7 % + residual FM (5 kHz
<
f
mod
<
100 kHz)
Ext. frequency response: (to -1 dB):
DC coupling:
0…100 kHz
AC coupling:
100 Hz…100 kHz
Distortion:
<
1 % for deviation
≥
50 kHz at 1 kHz
<
3 % for deviation
≥
10 kHz
Phase modulation
Source:
internal or external
Deviation:
<
16 MHz:
0…3.14 rad
>
16 MHz:
0…10 rad
Resolution:
0.01 rad
Accuracy:
±5 % to 1 kHz + residual PM
Ext. frequency response (to -1dB):
DC coupling:
0…100 kHz
AC coupling:
100 Hz…100 kHz
Distortion:
<
3 % for f
mod
= 1 kHz and deviation = 10 rad
FSK modulation
Range (F0…F1):
16 MHz…3 GHz
Mode:
2 FSK levels
Data source:
external
Max. rate:
10 kbit/s
Shift (F1…F0):
0…10 MHz
Resolution:
100 Hz
Accuracy:
see under FM
PSK modulation
Mode:
2 PSK levels
Data source:
external
Max. rate:
10 kbit/s
Shift (Ph1…Ph0):
<
16 MHz:
0…±3.14 rad
>
16 MHz:
0…±10 rad
Resolution:
0.01 rad
Accuracy:
see under PM
Pulse modulation
Source:
external (rear panel)
Dynamic range:
f
<
2 GHz:
>
80 dB
f
>
2 GHz:
>
55 dB
Rise/fall times:
<
50 ns (typ.
<
10 ns)
Delay:
<
100 ns
Max. frequency:
2.5 MHz (typ. 5 MHz)
Input level:
TTL
Sweep mode
Range:
1…3000 MHz
Depth:
500 Hz…2999 MHz
Sweep time:
20 ms…5 s
Trigger:
internal
Protective functions
The synthesizer is protected against reverse power applied on RF output
up to 1 W for a 50 Ω source and against any DC source up to ±7 V. The pro-
tection disconnects the output until manually reset by operator.
Miscellaneous
Interfaces:
USB/RS-232 (HO820), IEEE-488 (option)
Configuration memories:
10
Safety class:
Safety Class I (EN61010-1)
Power supply:
115…230 V ±10 %, 50/60 Hz, CAT II
Power consumption:
approx. 40 VA
Operating temperature:
+5…+40 °C
Storage temperature:
-20…+70 °C
Rel. humidity:
5…80 % (non condensing)
3 GHz RF-Synthesizer HM8135
All data valid at 23 °C after 30 minutes warm-up.
Frequency
Range:
1 Hz…3 GHz
Resolution:
1 Hz
Settling time:
<
10 ms
Frequency Reference 10 MHz
Standard: TCXO
Temperature stability
(0…50 °C):
≤
±0.5 ppm
Aging:
≤
±1 ppm/year
Option:
OCXO (HO85)
Temperature stability
(0…50 °C):
≤
±1x 10
-8
Aging:
≤
±1x 10
-9
/day
Internal reference output:
(rear panel)
Level:
TTL
External reference input:
(rear panel)
Level:
>
0 dBm
Frequency:
10 MHz ±20 ppm
Spectral purity (without modulation)
Harmonics:
≤
-35 dBc
Non-harmonics:
≤
-50 dBc (
>
15 kHz from carrier)
Sub-harmonics:
≤
-50 dBc
Phase noise:
(at 20 kHz from carrier)
f
<
16 MHz:
≤
-120 dBc/Hz
16 MHz
≤
f
<
250 MHz:
≤
-95 dBc/Hz
250 MHz
≤
f
<
500 MHz:
≤
-105 dBc/Hz
500 MHz
≤
f
<
1000 MHz:
≤
-100 dBc/Hz
1 GHz
≤
f
<
2 GHz:
≤
-95 dBc/Hz
2 GHz
≤
f
<
3 GHz:
≤
-90 dBc/Hz
Residual FM:
typ.
<
4 Hz;
≤
6.5 Hz (in 0.3…3 kHz bandwidth)
Residual AM:
typ.
<
0.06 % (in 0.03…20 kHz bandwidth)
(Typical phase noise at 1 GHz)
Output level
Range:
-135…+13 dBm
Resolution:
0.1 dB
Display-Offset for ext. Attn.:
0.0…30.0 dB in 0.1 dB steps
Precision f
<
1.5 GHz; level
>
-120 dBm
for level
>
-57 dBm:
≤
±0.5 dB
for level
<
-57 dBm:
≤
±(0.5 dB + (0.2x (-57 dBm - level))/10)
Precision f
>
1.5 GHz; level
>
-120 dBm
for level
>
-57 dBm:
≤
±0.7 dB
for level
<
-57 dBm:
≤
±(0.7 dB + (0.5x (-57 dBm - level))/10)
Impedance:
50 Ω
V.S.W.R.:
f
≤
1 GHz:
≤
1.5
f
>
1 GHz:
≤
2.5
Modulation sources
Internal:
10 Hz…200 kHz sine wave
10 Hz…20 kHz square wave, triangle, sawtooth
Resolution:
10 Hz
External:
Input on front panel
Impedance:
10 kΩ II 50 pF
Input level:
2 V
pp
for full scale
Coupling:
AC or DC
Output:
Front panel
Level
2 V
pp
Impedance:
1 kΩ
Amplitude modulation (Level
≤
+7 dBm)
Source:
Internal or external
AM-depth:
0…100 %
Resolution:
0.1 %
Accuracy:
±4 % displayed rate ±0.5 %
(AM-depth
≤
80 %, f
mod
≤
50 kHz)
Ext. frequency resp. (to -1 dB):
10 Hz…100 kHz for AC
Distortion:
<
2 % (AM-depth
≤
60 %, f
mod
≤
1 kHz)
<
6 % (AM-depth
≤
80 %, f
mod
<
20 kHz)
Frequency modulation
Source:
internal or external
Deviation:
±200 Hz…400 kHz
(depending on frequency band)
Resolution:
100 Hz
Accuracy:
±3 % + residual FM (f
mod
≤
5 kHz)
±7 % + residual FM (5 kHz
<
f
mod
<
100 kHz)
Ext. frequency response: (to -1 dB):
DC coupling:
0…100 kHz
AC coupling:
100 Hz…100 kHz
Distortion:
<
1 % for deviation
≥
50 kHz at 1 kHz
<
3 % for deviation
≥
10 kHz
Phase modulation
Source:
internal or external
Deviation:
<
16 MHz:
0…3.14 rad
>
16 MHz:
0…10 rad
Resolution:
0.01 rad
Accuracy:
±5 % to 1 kHz + residual PM
Ext. frequency response (to -1dB):
DC coupling:
0…100 kHz
AC coupling:
100 Hz…100 kHz
Distortion:
<
3 % for f
mod
= 1 kHz and deviation = 10 rad
FSK modulation
Range (F0…F1):
16 MHz…3 GHz
Mode:
2 FSK levels
Data source:
external
Max. rate:
10 kbit/s
Shift (F1…F0):
0…10 MHz
Resolution:
100 Hz
Accuracy:
see under FM
PSK modulation
Mode:
2 PSK levels
Data source:
external
Max. rate:
10 kbit/s
Shift (Ph1…Ph0):
<
16 MHz:
0…±3.14 rad
>
16 MHz:
0…±10 rad
Resolution:
0.01 rad
Accuracy:
see under PM
Pulse modulation
Source:
external (rear panel)
Dynamic range:
f
<
2 GHz:
>
80 dB
f
>
2 GHz:
>
55 dB
Rise/fall times:
<
50 ns (typ.
<
10 ns)
Delay:
<
100 ns
Max. frequency:
2.5 MHz (typ. 5 MHz)
Input level:
TTL
Sweep mode
Range:
1…3000 MHz
Depth:
500 Hz…2999 MHz
Sweep time:
20 ms…5 s
Trigger:
internal
Protective functions
The synthesizer is protected against reverse power applied on RF output
up to 1 W for a 50 Ω source and against any DC source up to ±7 V. The pro-
tection disconnects the output until manually reset by operator.
Miscellaneous
Interfaces:
USB/RS-232 (HO820), IEEE-488 (option)
Configuration memories:
10
Safety class:
Safety Class I (EN61010-1)
Power supply:
115…230 V ±10 %, 50/60 Hz, CAT II
Power consumption:
approx. 40 VA
Operating temperature:
+5…+40 °C
Storage temperature:
-20…+70 °C
Rel. humidity:
5…80 % (non condensing)
3 GHz RF-Synthesizer HM8135
All data valid at 23 °C after 30 minutes warm-up.
Frequency
Range:
1 Hz…3 GHz
Resolution:
1 Hz
Settling time:
<
10 ms
Frequency Reference 10 MHz
Standard: TCXO
Temperature stability
(0…50 °C):
≤
±0.5 ppm
Aging:
≤
±1 ppm/year
Option:
OCXO (HO85)
Temperature stability
(0…50 °C):
≤
±1x 10
-8
Aging:
≤
±1x 10
-9
/day
Internal reference output:
(rear panel)
Level:
TTL
External reference input:
(rear panel)
Level:
>
0 dBm
Frequency:
10 MHz ±20 ppm
Spectral purity (without modulation)
Harmonics:
≤
-35 dBc
Non-harmonics:
≤
-50 dBc (
>
15 kHz from carrier)
Sub-harmonics:
≤
-50 dBc
Phase noise:
(at 20 kHz from carrier)
f
<
16 MHz:
≤
-120 dBc/Hz
16 MHz
≤
f
<
250 MHz:
≤
-95 dBc/Hz
250 MHz
≤
f
<
500 MHz:
≤
-105 dBc/Hz
500 MHz
≤
f
<
1000 MHz:
≤
-100 dBc/Hz
1 GHz
≤
f
<
2 GHz:
≤
-95 dBc/Hz
2 GHz
≤
f
<
3 GHz:
≤
-90 dBc/Hz
Residual FM:
typ.
<
4 Hz;
≤
6.5 Hz (in 0.3…3 kHz bandwidth)
Residual AM:
typ.
<
0.06 % (in 0.03…20 kHz bandwidth)
(Typical phase noise at 1 GHz)
Output level
Range:
-135…+13 dBm
Resolution:
0.1 dB
Display-Offset for ext. Attn.:
0.0…30.0 dB in 0.1 dB steps
Precision f
<
1.5 GHz; level
>
-120 dBm
for level
>
-57 dBm:
≤
±0.5 dB
for level
<
-57 dBm:
≤
±(0.5 dB + (0.2x (-57 dBm - level))/10)
Precision f
>
1.5 GHz; level
>
-120 dBm
for level
>
-57 dBm:
≤
±0.7 dB
for level
<
-57 dBm:
≤
±(0.7 dB + (0.5x (-57 dBm - level))/10)
Impedance:
50 Ω
V.S.W.R.:
f
≤
1 GHz:
≤
1.5
f
>
1 GHz:
≤
2.5
Modulation sources
Internal:
10 Hz…200 kHz sine wave
10 Hz…20 kHz square wave, triangle, sawtooth
Resolution:
10 Hz
External:
Input on front panel
Impedance:
10 kΩ II 50 pF
Input level:
2 V
pp
for full scale
Coupling:
AC or DC
Output:
Front panel
Level
2 V
pp
Impedance:
1 kΩ
Amplitude modulation (Level
≤
+7 dBm)
Source:
Internal or external
AM-depth:
0…100 %
Resolution:
0.1 %
Accuracy:
±4 % displayed rate ±0.5 %
(AM-depth
≤
80 %, f
mod
≤
50 kHz)
Ext. frequency resp. (to -1 dB):
10 Hz…100 kHz for AC
Distortion:
<
2 % (AM-depth
≤
60 %, f
mod
≤
1 kHz)
<
6 % (AM-depth
≤
80 %, f
mod
<
20 kHz)
Frequency modulation
Source:
internal or external
Deviation:
±200 Hz…400 kHz
(depending on frequency band)
Resolution:
100 Hz
Accuracy:
±3 % + residual FM (f
mod
≤
5 kHz)
±7 % + residual FM (5 kHz
<
f
mod
<
100 kHz)
Ext. frequency response: (to -1 dB):
DC coupling:
0…100 kHz
AC coupling:
100 Hz…100 kHz
Distortion:
<
1 % for deviation
≥
50 kHz at 1 kHz
<
3 % for deviation
≥
10 kHz
Phase modulation
Source:
internal or external
Deviation:
<
16 MHz:
0…3.14 rad
>
16 MHz:
0…10 rad
Resolution:
0.01 rad
Accuracy:
±5 % to 1 kHz + residual PM
Ext. frequency response (to -1dB):
DC coupling:
0…100 kHz
AC coupling:
100 Hz…100 kHz
Distortion:
<
3 % for f
mod
= 1 kHz and deviation = 10 rad
FSK modulation
Range (F0…F1):
16 MHz…3 GHz
Mode:
2 FSK levels
Data source:
external
Max. rate:
10 kbit/s
Shift (F1…F0):
0…10 MHz
Resolution:
100 Hz
Accuracy:
see under FM
PSK modulation
Mode:
2 PSK levels
Data source:
external
Max. rate:
10 kbit/s
Shift (Ph1…Ph0):
<
16 MHz:
0…±3.14 rad
>
16 MHz:
0…±10 rad
Resolution:
0.01 rad
Accuracy:
see under PM
Pulse modulation
Source:
external (rear panel)
Dynamic range:
f
<
2 GHz:
>
80 dB
f
>
2 GHz:
>
55 dB
Rise/fall times:
<
50 ns (typ.
<
10 ns)
Delay:
<
100 ns
Max. frequency:
2.5 MHz (typ. 5 MHz)
Input level:
TTL
Sweep mode
Range:
1…3000 MHz
Depth:
500 Hz…2999 MHz
Sweep time:
20 ms…5 s
Trigger:
internal
Protective functions
The synthesizer is protected against reverse power applied on RF output
up to 1 W for a 50 Ω source and against any DC source up to ±7 V. The pro-
tection disconnects the output until manually reset by operator.
Miscellaneous
Interfaces:
USB/RS-232 (HO820), IEEE-488 (option)
Configuration memories:
10
Safety class:
Safety Class I (EN61010-1)
Power supply:
115…230 V ±10 %, 50/60 Hz, CAT II
Power consumption:
approx. 40 VA
Operating temperature:
+5…+40 °C
Storage temperature:
-20…+70 °C
Rel. humidity:
5…80 % (non condensing)
3 GHz RF-Synthesizer HM8135
All data valid at 23 °C after 30 minutes warm-up.
Frequency
Range:
1 Hz…3 GHz
Resolution:
1 Hz
Settling time:
<
10 ms
Frequency Reference 10 MHz
Standard: TCXO
Temperature stability
(0…50 °C):
≤
±0.5 ppm
Aging:
≤
±1 ppm/year
Option:
OCXO (HO85)
Temperature stability
(0…50 °C):
≤
±1x 10
-8
Aging:
≤
±1x 10
-9
/day
Internal reference output:
(rear panel)
Level:
TTL
External reference input:
(rear panel)
Level:
>
0 dBm
Frequency:
10 MHz ±20 ppm
Spectral purity (without modulation)
Harmonics:
≤
-35 dBc
Non-harmonics:
≤
-50 dBc (
>
15 kHz from carrier)
Sub-harmonics:
≤
-50 dBc
Phase noise:
(at 20 kHz from carrier)
f
<
16 MHz:
≤
-120 dBc/Hz
16 MHz
≤
f
<
250 MHz:
≤
-95 dBc/Hz
250 MHz
≤
f
<
500 MHz:
≤
-105 dBc/Hz
500 MHz
≤
f
<
1000 MHz:
≤
-100 dBc/Hz
1 GHz
≤
f
<
2 GHz:
≤
-95 dBc/Hz
2 GHz
≤
f
<
3 GHz:
≤
-90 dBc/Hz
Residual FM:
typ.
<
4 Hz;
≤
6.5 Hz (in 0.3…3 kHz bandwidth)
Residual AM:
typ.
<
0.06 % (in 0.03…20 kHz bandwidth)
(Typical phase noise at 1 GHz)
Output level
Range:
-135…+13 dBm
Resolution:
0.1 dB
Display-Offset for ext. Attn.:
0.0…30.0 dB in 0.1 dB steps
Precision f
<
1.5 GHz; level
>
-120 dBm
for level
>
-57 dBm:
≤
±0.5 dB
for level
<
-57 dBm:
≤
±(0.5 dB + (0.2x (-57 dBm - level))/10)
Precision f
>
1.5 GHz; level
>
-120 dBm
for level
>
-57 dBm:
≤
±0.7 dB
for level
<
-57 dBm:
≤
±(0.7 dB + (0.5x (-57 dBm - level))/10)
Impedance:
50 Ω
V.S.W.R.:
f
≤
1 GHz:
≤
1.5
f
>
1 GHz:
≤
2.5
Modulation sources
Internal:
10 Hz…200 kHz sine wave
10 Hz…20 kHz square wave, triangle, sawtooth
Resolution:
10 Hz
External:
Input on front panel
Impedance:
10 kΩ II 50 pF
Input level:
2 V
pp
for full scale
Coupling:
AC or DC
Output:
Front panel
Level
2 V
pp
Impedance:
1 kΩ
Amplitude modulation (Level
≤
+7 dBm)
Source:
Internal or external
AM-depth:
0…100 %
Resolution:
0.1 %
Accuracy:
±4 % displayed rate ±0.5 %
(AM-depth
≤
80 %, f
mod
≤
50 kHz)
Ext. frequency resp. (to -1 dB):
10 Hz…100 kHz for AC
Distortion:
<
2 % (AM-depth
≤
60 %, f
mod
≤
1 kHz)
<
6 % (AM-depth
≤
80 %, f
mod
<
20 kHz)
Frequency modulation
Source:
internal or external
Deviation:
±200 Hz…400 kHz
(depending on frequency band)
Resolution:
100 Hz
Accuracy:
±3 % + residual FM (f
mod
≤
5 kHz)
±7 % + residual FM (5 kHz
<
f
mod
<
100 kHz)
Ext. frequency response: (to -1 dB):
DC coupling:
0…100 kHz
AC coupling:
100 Hz…100 kHz
Distortion:
<
1 % for deviation
≥
50 kHz at 1 kHz
<
3 % for deviation
≥
10 kHz
Phase modulation
Source:
internal or external
Deviation:
<
16 MHz:
0…3.14 rad
>
16 MHz:
0…10 rad
Resolution:
0.01 rad
Accuracy:
±5 % to 1 kHz + residual PM
Ext. frequency response (to -1dB):
DC coupling:
0…100 kHz
AC coupling:
100 Hz…100 kHz
Distortion:
<
3 % for f
mod
= 1 kHz and deviation = 10 rad
FSK modulation
Range (F0…F1):
16 MHz…3 GHz
Mode:
2 FSK levels
Data source:
external
Max. rate:
10 kbit/s
Shift (F1…F0):
0…10 MHz
Resolution:
100 Hz
Accuracy:
see under FM
PSK modulation
Mode:
2 PSK levels
Data source:
external
Max. rate:
10 kbit/s
Shift (Ph1…Ph0):
<
16 MHz:
0…±3.14 rad
>
16 MHz:
0…±10 rad
Resolution:
0.01 rad
Accuracy:
see under PM
Pulse modulation
Source:
external (rear panel)
Dynamic range:
f
<
2 GHz:
>
80 dB
f
>
2 GHz:
>
55 dB
Rise/fall times:
<
50 ns (typ.
<
10 ns)
Delay:
<
100 ns
Max. frequency:
2.5 MHz (typ. 5 MHz)
Input level:
TTL
Sweep mode
Range:
1…3000 MHz
Depth:
500 Hz…2999 MHz
Sweep time:
20 ms…5 s
Trigger:
internal
Protective functions
The synthesizer is protected against reverse power applied on RF output
up to 1 W for a 50 Ω source and against any DC source up to ±7 V. The pro-
tection disconnects the output until manually reset by operator.
Miscellaneous
Interfaces:
USB/RS-232 (HO820), IEEE-488 (option)
Configuration memories:
10
Safety class:
Safety Class I (EN61010-1)
Power supply:
115…230 V ±10 %, 50/60 Hz, CAT II
Power consumption:
approx. 40 VA
Operating temperature:
+5…+40 °C
Storage temperature:
-20…+70 °C
Rel. humidity:
5…80 % (non condensing)
3 GHz RF-Synthesizer HM8135
All data valid at 23 °C after 30 minutes warm-up.
Frequency
Range:
1 Hz…3 GHz
Resolution:
1 Hz
Settling time:
<
10 ms
Frequency Reference 10 MHz
Standard: TCXO
Temperature stability
(0…50 °C):
≤
±0.5 ppm
Aging:
≤
±1 ppm/year
Option:
OCXO (HO85)
Temperature stability
(0…50 °C):
≤
±1x 10
-8
Aging:
≤
±1x 10
-9
/day
Internal reference output:
(rear panel)
Level:
TTL
External reference input:
(rear panel)
Level:
>
0 dBm
Frequency:
10 MHz ±20 ppm
Spectral purity (without modulation)
Harmonics:
≤
-35 dBc
Non-harmonics:
≤
-50 dBc (
>
15 kHz from carrier)
Sub-harmonics:
≤
-50 dBc
Phase noise:
(at 20 kHz from carrier)
f
<
16 MHz:
≤
-120 dBc/Hz
16 MHz
≤
f
<
250 MHz:
≤
-95 dBc/Hz
250 MHz
≤
f
<
500 MHz:
≤
-105 dBc/Hz
500 MHz
≤
f
<
1000 MHz:
≤
-100 dBc/Hz
1 GHz
≤
f
<
2 GHz:
≤
-95 dBc/Hz
2 GHz
≤
f
<
3 GHz:
≤
-90 dBc/Hz
Residual FM:
typ.
<
4 Hz;
≤
6.5 Hz (in 0.3…3 kHz bandwidth)
Residual AM:
typ.
<
0.06 % (in 0.03…20 kHz bandwidth)
(Typical phase noise at 1 GHz)
Output level
Range:
-135…+13 dBm
Resolution:
0.1 dB
Display-Offset for ext. Attn.:
0.0…30.0 dB in 0.1 dB steps
Precision f
<
1.5 GHz; level
>
-120 dBm
for level
>
-57 dBm:
≤
±0.5 dB
for level
<
-57 dBm:
≤
±(0.5 dB + (0.2x (-57 dBm - level))/10)
Precision f
>
1.5 GHz; level
>
-120 dBm
for level
>
-57 dBm:
≤
±0.7 dB
for level
<
-57 dBm:
≤
±(0.7 dB + (0.5x (-57 dBm - level))/10)
Impedance:
50 Ω
V.S.W.R.:
f
≤
1 GHz:
≤
1.5
f
>
1 GHz:
≤
2.5
Modulation sources
Internal:
10 Hz…200 kHz sine wave
10 Hz…20 kHz square wave, triangle, sawtooth
Resolution:
10 Hz
External:
Input on front panel
Impedance:
10 kΩ II 50 pF
Input level:
2 V
pp
for full scale
Coupling:
AC or DC
Output:
Front panel
Level
2 V
pp
Impedance:
1 kΩ
Amplitude modulation (Level
≤
+7 dBm)
Source:
Internal or external
AM-depth:
0…100 %
Resolution:
0.1 %
Accuracy:
±4 % displayed rate ±0.5 %
(AM-depth
≤
80 %, f
mod
≤
50 kHz)
Ext. frequency resp. (to -1 dB):
10 Hz…100 kHz for AC
Distortion:
<
2 % (AM-depth
≤
60 %, f
mod
≤
1 kHz)
<
6 % (AM-depth
≤
80 %, f
mod
<
20 kHz)
Frequency modulation
Source:
internal or external
Deviation:
±200 Hz…400 kHz
(depending on frequency band)
Resolution:
100 Hz
Accuracy:
±3 % + residual FM (f
mod
≤
5 kHz)
±7 % + residual FM (5 kHz
<
f
mod
<
100 kHz)
Ext. frequency response: (to -1 dB):
DC coupling:
0…100 kHz
AC coupling:
100 Hz…100 kHz
Distortion:
<
1 % for deviation
≥
50 kHz at 1 kHz
<
3 % for deviation
≥
10 kHz
Phase modulation
Source:
internal or external
Deviation:
<
16 MHz:
0…3.14 rad
>
16 MHz:
0…10 rad
Resolution:
0.01 rad
Accuracy:
±5 % to 1 kHz + residual PM
Ext. frequency response (to -1dB):
DC coupling:
0…100 kHz
AC coupling:
100 Hz…100 kHz
Distortion:
<
3 % for f
mod
= 1 kHz and deviation = 10 rad
FSK modulation
Range (F0…F1):
16 MHz…3 GHz
Mode:
2 FSK levels
Data source:
external
Max. rate:
10 kbit/s
Shift (F1…F0):
0…10 MHz
Resolution:
100 Hz
Accuracy:
see under FM
PSK modulation
Mode:
2 PSK levels
Data source:
external
Max. rate:
10 kbit/s
Shift (Ph1…Ph0):
<
16 MHz:
0…±3.14 rad
>
16 MHz:
0…±10 rad
Resolution:
0.01 rad
Accuracy:
see under PM
Pulse modulation
Source:
external (rear panel)
Dynamic range:
f
<
2 GHz:
>
80 dB
f
>
2 GHz:
>
55 dB
Rise/fall times:
<
50 ns (typ.
<
10 ns)
Delay:
<
100 ns
Max. frequency:
2.5 MHz (typ. 5 MHz)
Input level:
TTL
Sweep mode
Range:
1…3000 MHz
Depth:
500 Hz…2999 MHz
Sweep time:
20 ms…5 s
Trigger:
internal
Protective functions
The synthesizer is protected against reverse power applied on RF output
up to 1 W for a 50 Ω source and against any DC source up to ±7 V. The pro-
tection disconnects the output until manually reset by operator.
Miscellaneous
Interfaces:
USB/RS-232 (HO820), IEEE-488 (option)
Configuration memories:
10
Safety class:
Safety Class I (EN61010-1)
Power supply:
115…230 V ±10 %, 50/60 Hz, CAT II
Power consumption:
approx. 40 VA
Operating temperature:
+5…+40 °C
Storage temperature:
-20…+70 °C
Rel. humidity:
5…80 % (non condensing)
3 GHz RF-Synthesizer HM8135
All data valid at 23 °C after 30 minutes warm-up.
Frequency
Range:
1 Hz…3 GHz
Resolution:
1 Hz
Settling time:
<
10 ms
Frequency Reference 10 MHz
Standard: TCXO
Temperature stability
(0…50 °C):
≤
±0.5 ppm
Aging:
≤
±1 ppm/year
Option:
OCXO (HO85)
Temperature stability
(0…50 °C):
≤
±1x 10
-8
Aging:
≤
±1x 10
-9
/day
Internal reference output:
(rear panel)
Level:
TTL
External reference input:
(rear panel)
Level:
>
0 dBm
Frequency:
10 MHz ±20 ppm
Spectral purity (without modulation)
Harmonics:
≤
-35 dBc
Non-harmonics:
≤
-50 dBc (
>
15 kHz from carrier)
Sub-harmonics:
≤
-50 dBc
Phase noise:
(at 20 kHz from carrier)
f
<
16 MHz:
≤
-120 dBc/Hz
16 MHz
≤
f
<
250 MHz:
≤
-95 dBc/Hz
250 MHz
≤
f
<
500 MHz:
≤
-105 dBc/Hz
500 MHz
≤
f
<
1000 MHz:
≤
-100 dBc/Hz
1 GHz
≤
f
<
2 GHz:
≤
-95 dBc/Hz
2 GHz
≤
f
<
3 GHz:
≤
-90 dBc/Hz
Residual FM:
typ.
<
4 Hz;
≤
6.5 Hz (in 0.3…3 kHz bandwidth)
Residual AM:
typ.
<
0.06 % (in 0.03…20 kHz bandwidth)
(Typical phase noise at 1 GHz)
Output level
Range:
-135…+13 dBm
Resolution:
0.1 dB
Display-Offset for ext. Attn.:
0.0…30.0 dB in 0.1 dB steps
Precision f
<
1.5 GHz; level
>
-120 dBm
for level
>
-57 dBm:
≤
±0.5 dB
for level
<
-57 dBm:
≤
±(0.5 dB + (0.2x (-57 dBm - level))/10)
Precision f
>
1.5 GHz; level
>
-120 dBm
for level
>
-57 dBm:
≤
±0.7 dB
for level
<
-57 dBm:
≤
±(0.7 dB + (0.5x (-57 dBm - level))/10)
Impedance:
50 Ω
V.S.W.R.:
f
≤
1 GHz:
≤
1.5
f
>
1 GHz:
≤
2.5
Modulation sources
Internal:
10 Hz…200 kHz sine wave
10 Hz…20 kHz square wave, triangle, sawtooth
Resolution:
10 Hz
External:
Input on front panel
Impedance:
10 kΩ II 50 pF
Input level:
2 V
pp
for full scale
Coupling:
AC or DC
Output:
Front panel
Level
2 V
pp
Impedance:
1 kΩ
Amplitude modulation (Level
≤
+7 dBm)
Source:
Internal or external
AM-depth:
0…100 %
Resolution:
0.1 %
Accuracy:
±4 % displayed rate ±0.5 %
(AM-depth
≤
80 %, f
mod
≤
50 kHz)
Ext. frequency resp. (to -1 dB):
10 Hz…100 kHz for AC
Distortion:
<
2 % (AM-depth
≤
60 %, f
mod
≤
1 kHz)
<
6 % (AM-depth
≤
80 %, f
mod
<
20 kHz)
Frequency modulation
Source:
internal or external
Deviation:
±200 Hz…400 kHz
(depending on frequency band)
Resolution:
100 Hz
Accuracy:
±3 % + residual FM (f
mod
≤
5 kHz)
±7 % + residual FM (5 kHz
<
f
mod
<
100 kHz)
Ext. frequency response: (to -1 dB):
DC coupling:
0…100 kHz
AC coupling:
100 Hz…100 kHz
Distortion:
<
1 % for deviation
≥
50 kHz at 1 kHz
<
3 % for deviation
≥
10 kHz
Phase modulation
Source:
internal or external
Deviation:
<
16 MHz:
0…3.14 rad
>
16 MHz:
0…10 rad
Resolution:
0.01 rad
Accuracy:
±5 % to 1 kHz + residual PM
Ext. frequency response (to -1dB):
DC coupling:
0…100 kHz
AC coupling:
100 Hz…100 kHz
Distortion:
<
3 % for f
mod
= 1 kHz and deviation = 10 rad
FSK modulation
Range (F0…F1):
16 MHz…3 GHz
Mode:
2 FSK levels
Data source:
external
Max. rate:
10 kbit/s
Shift (F1…F0):
0…10 MHz
Resolution:
100 Hz
Accuracy:
see under FM
PSK modulation
Mode:
2 PSK levels
Data source:
external
Max. rate:
10 kbit/s
Shift (Ph1…Ph0):
<
16 MHz:
0…±3.14 rad
>
16 MHz:
0…±10 rad
Resolution:
0.01 rad
Accuracy:
see under PM
Pulse modulation
Source:
external (rear panel)
Dynamic range:
f
<
2 GHz:
>
80 dB
f
>
2 GHz:
>
55 dB
Rise/fall times:
<
50 ns (typ.
<
10 ns)
Delay:
<
100 ns
Max. frequency:
2.5 MHz (typ. 5 MHz)
Input level:
TTL
Sweep mode
Range:
1…3000 MHz
Depth:
500 Hz…2999 MHz
Sweep time:
20 ms…5 s
Trigger:
internal
Protective functions
The synthesizer is protected against reverse power applied on RF output
up to 1 W for a 50 Ω source and against any DC source up to ±7 V. The pro-
tection disconnects the output until manually reset by operator.
Miscellaneous
Interfaces:
USB/RS-232 (HO820), IEEE-488 (option)
Configuration memories:
10
Safety class:
Safety Class I (EN61010-1)
Power supply:
115…230 V ±10 %, 50/60 Hz, CAT II
Power consumption:
approx. 40 VA
Operating temperature:
+5…+40 °C
Storage temperature:
-20…+70 °C
Rel. humidity:
5…80 % (non condensing)
3 GHz RF-Synthesizer HM8135
All data valid at 23 °C after 30 minutes warm-up.
Frequency
Range:
1 Hz…3 GHz
Resolution:
1 Hz
Settling time:
<
10 ms
Frequency Reference 10 MHz
Standard: TCXO
Temperature stability
(0…50 °C):
≤
±0.5 ppm
Aging:
≤
±1 ppm/year
Option:
OCXO (HO85)
Temperature stability
(0…50 °C):
≤
±1x 10
-8
Aging:
≤
±1x 10
-9
/day
Internal reference output:
(rear panel)
Level:
TTL
External reference input:
(rear panel)
Level:
>
0 dBm
Frequency:
10 MHz ±20 ppm
Spectral purity (without modulation)
Harmonics:
≤
-35 dBc
Non-harmonics:
≤
-50 dBc (
>
15 kHz from carrier)
Sub-harmonics:
≤
-50 dBc
Phase noise:
(at 20 kHz from carrier)
f
<
16 MHz:
≤
-120 dBc/Hz
16 MHz
≤
f
<
250 MHz:
≤
-95 dBc/Hz
250 MHz
≤
f
<
500 MHz:
≤
-105 dBc/Hz
500 MHz
≤
f
<
1000 MHz:
≤
-100 dBc/Hz
1 GHz
≤
f
<
2 GHz:
≤
-95 dBc/Hz
2 GHz
≤
f
<
3 GHz:
≤
-90 dBc/Hz
Residual FM:
typ.
<
4 Hz;
≤
6.5 Hz (in 0.3…3 kHz bandwidth)
Residual AM:
typ.
<
0.06 % (in 0.03…20 kHz bandwidth)
(Typical phase noise at 1 GHz)
Output level
Range:
-135…+13 dBm
Resolution:
0.1 dB
Display-Offset for ext. Attn.:
0.0…30.0 dB in 0.1 dB steps
Precision f
<
1.5 GHz; level
>
-120 dBm
for level
>
-57 dBm:
≤
±0.5 dB
for level
<
-57 dBm:
≤
±(0.5 dB + (0.2x (-57 dBm - level))/10)
Precision f
>
1.5 GHz; level
>
-120 dBm
for level
>
-57 dBm:
≤
±0.7 dB
for level
<
-57 dBm:
≤
±(0.7 dB + (0.5x (-57 dBm - level))/10)
Impedance:
50 Ω
V.S.W.R.:
f
≤
1 GHz:
≤
1.5
f
>
1 GHz:
≤
2.5
Modulation sources
Internal:
10 Hz…200 kHz sine wave
10 Hz…20 kHz square wave, triangle, sawtooth
Resolution:
10 Hz
External:
Input on front panel
Impedance:
10 kΩ II 50 pF
Input level:
2 V
pp
for full scale
Coupling:
AC or DC
Output:
Front panel
Level
2 V
pp
Impedance:
1 kΩ
Amplitude modulation (Level
≤
+7 dBm)
Source:
Internal or external
AM-depth:
0…100 %
Resolution:
0.1 %
Accuracy:
±4 % displayed rate ±0.5 %
(AM-depth
≤
80 %, f
mod
≤
50 kHz)
Ext. frequency resp. (to -1 dB):
10 Hz…100 kHz for AC
Distortion:
<
2 % (AM-depth
≤
60 %, f
mod
≤
1 kHz)
<
6 % (AM-depth
≤
80 %, f
mod
<
20 kHz)
Frequency modulation
Source:
internal or external
Deviation:
±200 Hz…400 kHz
(depending on frequency band)
Resolution:
100 Hz
Accuracy:
±3 % + residual FM (f
mod
≤
5 kHz)
±7 % + residual FM (5 kHz
<
f
mod
<
100 kHz)
Ext. frequency response: (to -1 dB):
DC coupling:
0…100 kHz
AC coupling:
100 Hz…100 kHz
Distortion:
<
1 % for deviation
≥
50 kHz at 1 kHz
<
3 % for deviation
≥
10 kHz
Phase modulation
Source:
internal or external
Deviation:
<
16 MHz:
0…3.14 rad
>
16 MHz:
0…10 rad
Resolution:
0.01 rad
Accuracy:
±5 % to 1 kHz + residual PM
Ext. frequency response (to -1dB):
DC coupling:
0…100 kHz
AC coupling:
100 Hz…100 kHz
Distortion:
<
3 % for f
mod
= 1 kHz and deviation = 10 rad
FSK modulation
Range (F0…F1):
16 MHz…3 GHz
Mode:
2 FSK levels
Data source:
external
Max. rate:
10 kbit/s
Shift (F1…F0):
0…10 MHz
Resolution:
100 Hz
Accuracy:
see under FM
PSK modulation
Mode:
2 PSK levels
Data source:
external
Max. rate:
10 kbit/s
Shift (Ph1…Ph0):
<
16 MHz:
0…±3.14 rad
>
16 MHz:
0…±10 rad
Resolution:
0.01 rad
Accuracy:
see under PM
Pulse modulation
Source:
external (rear panel)
Dynamic range:
f
<
2 GHz:
>
80 dB
f
>
2 GHz:
>
55 dB
Rise/fall times:
<
50 ns (typ.
<
10 ns)
Delay:
<
100 ns
Max. frequency:
2.5 MHz (typ. 5 MHz)
Input level:
TTL
Sweep mode
Range:
1…3000 MHz
Depth:
500 Hz…2999 MHz
Sweep time:
20 ms…5 s
Trigger:
internal
Protective functions
The synthesizer is protected against reverse power applied on RF output
up to 1 W for a 50 Ω source and against any DC source up to ±7 V. The pro-
tection disconnects the output until manually reset by operator.
Miscellaneous
Interfaces:
USB/RS-232 (HO820), IEEE-488 (option)
Configuration memories:
10
Safety class:
Safety Class I (EN61010-1)
Power supply:
115…230 V ±10 %, 50/60 Hz, CAT II
Power consumption:
approx. 40 VA
Operating temperature:
+5…+40 °C
Storage temperature:
-20…+70 °C
Rel. humidity:
5…80 % (non condensing)
3 GHz RF-Synthesizer HM8135
All data valid at 23 °C after 30 minutes warm-up.
Frequency
Range:
1 Hz…3 GHz
Resolution:
1 Hz
Settling time:
<
10 ms
Frequency Reference 10 MHz
Standard: TCXO
Temperature stability
(0…50 °C):
≤
±0.5 ppm
Aging:
≤
±1 ppm/year
Option:
OCXO (HO85)
Temperature stability
(0…50 °C):
≤
±1x 10
-8
Aging:
≤
±1x 10
-9
/day
Internal reference output:
(rear panel)
Level:
TTL
External reference input:
(rear panel)
Level:
>
0 dBm
Frequency:
10 MHz ±20 ppm
Spectral purity (without modulation)
Harmonics:
≤
-35 dBc
Non-harmonics:
≤
-50 dBc (
>
15 kHz from carrier)
Sub-harmonics:
≤
-50 dBc
Phase noise:
(at 20 kHz from carrier)
f
<
16 MHz:
≤
-120 dBc/Hz
16 MHz
≤
f
<
250 MHz:
≤
-95 dBc/Hz
250 MHz
≤
f
<
500 MHz:
≤
-105 dBc/Hz
500 MHz
≤
f
<
1000 MHz:
≤
-100 dBc/Hz
1 GHz
≤
f
<
2 GHz:
≤
-95 dBc/Hz
2 GHz
≤
f
<
3 GHz:
≤
-90 dBc/Hz
Residual FM:
typ.
<
4 Hz;
≤
6.5 Hz (in 0.3…3 kHz bandwidth)
Residual AM:
typ.
<
0.06 % (in 0.03…20 kHz bandwidth)
(Typical phase noise at 1 GHz)
Output level
Range:
-135…+13 dBm
Resolution:
0.1 dB
Display-Offset for ext. Attn.:
0.0…30.0 dB in 0.1 dB steps
Precision f
<
1.5 GHz; level
>
-120 dBm
for level
>
-57 dBm:
≤
±0.5 dB
for level
<
-57 dBm:
≤
±(0.5 dB + (0.2x (-57 dBm - level))/10)
Precision f
>
1.5 GHz; level
>
-120 dBm
for level
>
-57 dBm:
≤
±0.7 dB
for level
<
-57 dBm:
≤
±(0.7 dB + (0.5x (-57 dBm - level))/10)
Impedance:
50 Ω
V.S.W.R.:
f
≤
1 GHz:
≤
1.5
f
>
1 GHz:
≤
2.5
Modulation sources
Internal:
10 Hz…200 kHz sine wave
10 Hz…20 kHz square wave, triangle, sawtooth
Resolution:
10 Hz
External:
Input on front panel
Impedance:
10 kΩ II 50 pF
Input level:
2 V
pp
for full scale
Coupling:
AC or DC
Output:
Front panel
Level
2 V
pp
Impedance:
1 kΩ
Amplitude modulation (Level
≤
+7 dBm)
Source:
Internal or external
AM-depth:
0…100 %
Resolution:
0.1 %
Accuracy:
±4 % displayed rate ±0.5 %
(AM-depth
≤
80 %, f
mod
≤
50 kHz)
Ext. frequency resp. (to -1 dB):
10 Hz…100 kHz for AC
Distortion:
<
2 % (AM-depth
≤
60 %, f
mod
≤
1 kHz)
<
6 % (AM-depth
≤
80 %, f
mod
<
20 kHz)
Frequency modulation
Source:
internal or external
Deviation:
±200 Hz…400 kHz
(depending on frequency band)
Resolution:
100 Hz
Accuracy:
±3 % + residual FM (f
mod
≤
5 kHz)
±7 % + residual FM (5 kHz
<
f
mod
<
100 kHz)
Ext. frequency response: (to -1 dB):
DC coupling:
0…100 kHz
AC coupling:
100 Hz…100 kHz
Distortion:
<
1 % for deviation
≥
50 kHz at 1 kHz
<
3 % for deviation
≥
10 kHz
Phase modulation
Source:
internal or external
Deviation:
<
16 MHz:
0…3.14 rad
>
16 MHz:
0…10 rad
Resolution:
0.01 rad
Accuracy:
±5 % to 1 kHz + residual PM
Ext. frequency response (to -1dB):
DC coupling:
0…100 kHz
AC coupling:
100 Hz…100 kHz
Distortion:
<
3 % for f
mod
= 1 kHz and deviation = 10 rad
FSK modulation
Range (F0…F1):
16 MHz…3 GHz
Mode:
2 FSK levels
Data source:
external
Max. rate:
10 kbit/s
Shift (F1…F0):
0…10 MHz
Resolution:
100 Hz
Accuracy:
see under FM
PSK modulation
Mode:
2 PSK levels
Data source:
external
Max. rate:
10 kbit/s
Shift (Ph1…Ph0):
<
16 MHz:
0…±3.14 rad
>
16 MHz:
0…±10 rad
Resolution:
0.01 rad
Accuracy:
see under PM
Pulse modulation
Source:
external (rear panel)
Dynamic range:
f
<
2 GHz:
>
80 dB
f
>
2 GHz:
>
55 dB
Rise/fall times:
<
50 ns (typ.
<
10 ns)
Delay:
<
100 ns
Max. frequency:
2.5 MHz (typ. 5 MHz)
Input level:
TTL
Sweep mode
Range:
1…3000 MHz
Depth:
500 Hz…2999 MHz
Sweep time:
20 ms…5 s
Trigger:
internal
Protective functions
The synthesizer is protected against reverse power applied on RF output
up to 1 W for a 50 Ω source and against any DC source up to ±7 V. The pro-
tection disconnects the output until manually reset by operator.
Miscellaneous
Interfaces:
USB/RS-232 (HO820), IEEE-488 (option)
Configuration memories:
10
Safety class:
Safety Class I (EN61010-1)
Power supply:
115…230 V ±10 %, 50/60 Hz, CAT II
Power consumption:
approx. 40 VA
Operating temperature:
+5…+40 °C
Storage temperature:
-20…+70 °C
Rel. humidity:
5…80 % (non condensing)
3 GHz RF-Synthesizer HM8135
All data valid at 23 °C after 30 minutes warm-up.
Frequency
Range:
1 Hz…3 GHz
Resolution:
1 Hz
Settling time:
<
10 ms
Frequency Reference 10 MHz
Standard: TCXO
Temperature stability
(0…50 °C):
≤
±0.5 ppm
Aging:
≤
±1 ppm/year
Option:
OCXO (HO85)
Temperature stability
(0…50 °C):
≤
±1x 10
-8
Aging:
≤
±1x 10
-9
/day
Internal reference output:
(rear panel)
Level:
TTL
External reference input:
(rear panel)
Level:
>
0 dBm
Frequency:
10 MHz ±20 ppm
Spectral purity (without modulation)
Harmonics:
≤
-35 dBc
Non-harmonics:
≤
-50 dBc (
>
15 kHz from carrier)
Sub-harmonics:
≤
-50 dBc
Phase noise:
(at 20 kHz from carrier)
f
<
16 MHz:
≤
-120 dBc/Hz
16 MHz
≤
f
<
250 MHz:
≤
-95 dBc/Hz
250 MHz
≤
f
<
500 MHz:
≤
-105 dBc/Hz
500 MHz
≤
f
<
1000 MHz:
≤
-100 dBc/Hz
1 GHz
≤
f
<
2 GHz:
≤
-95 dBc/Hz
2 GHz
≤
f
<
3 GHz:
≤
-90 dBc/Hz
Residual FM:
typ.
<
4 Hz;
≤
6.5 Hz (in 0.3…3 kHz bandwidth)
Residual AM:
typ.
<
0.06 % (in 0.03…20 kHz bandwidth)
(Typical phase noise at 1 GHz)
Output level
Range:
-135…+13 dBm
Resolution:
0.1 dB
Display-Offset for ext. Attn.:
0.0…30.0 dB in 0.1 dB steps
Precision f
<
1.5 GHz; level
>
-120 dBm
for level
>
-57 dBm:
≤
±0.5 dB
for level
<
-57 dBm:
≤
±(0.5 dB + (0.2x (-57 dBm - level))/10)
Precision f
>
1.5 GHz; level
>
-120 dBm
for level
>
-57 dBm:
≤
±0.7 dB
for level
<
-57 dBm:
≤
±(0.7 dB + (0.5x (-57 dBm - level))/10)
Impedance:
50 Ω
V.S.W.R.:
f
≤
1 GHz:
≤
1.5
f
>
1 GHz:
≤
2.5
Modulation sources
Internal:
10 Hz…200 kHz sine wave
10 Hz…20 kHz square wave, triangle, sawtooth
Resolution:
10 Hz
External:
Input on front panel
Impedance:
10 kΩ II 50 pF
Input level:
2 V
pp
for full scale
Coupling:
AC or DC
Output:
Front panel
Level
2 V
pp
Impedance:
1 kΩ
Amplitude modulation (Level
≤
+7 dBm)
Source:
Internal or external
AM-depth:
0…100 %
Resolution:
0.1 %
Accuracy:
±4 % displayed rate ±0.5 %
(AM-depth
≤
80 %, f
mod
≤
50 kHz)
Ext. frequency resp. (to -1 dB):
10 Hz…100 kHz for AC
Distortion:
<
2 % (AM-depth
≤
60 %, f
mod
≤
1 kHz)
<
6 % (AM-depth
≤
80 %, f
mod
<
20 kHz)
Frequency modulation
Source:
internal or external
Deviation:
±200 Hz…400 kHz
(depending on frequency band)
Resolution:
100 Hz
Accuracy:
±3 % + residual FM (f
mod
≤
5 kHz)
±7 % + residual FM (5 kHz
<
f
mod
<
100 kHz)
Ext. frequency response: (to -1 dB):
DC coupling:
0…100 kHz
AC coupling:
100 Hz…100 kHz
Distortion:
<
1 % for deviation
≥
50 kHz at 1 kHz
<
3 % for deviation
≥
10 kHz
Phase modulation
Source:
internal or external
Deviation:
<
16 MHz:
0…3.14 rad
>
16 MHz:
0…10 rad
Resolution:
0.01 rad
Accuracy:
±5 % to 1 kHz + residual PM
Ext. frequency response (to -1dB):
DC coupling:
0…100 kHz
AC coupling:
100 Hz…100 kHz
Distortion:
<
3 % for f
mod
= 1 kHz and deviation = 10 rad
FSK modulation
Range (F0…F1):
16 MHz…3 GHz
Mode:
2 FSK levels
Data source:
external
Max. rate:
10 kbit/s
Shift (F1…F0):
0…10 MHz
Resolution:
100 Hz
Accuracy:
see under FM
PSK modulation
Mode:
2 PSK levels
Data source:
external
Max. rate:
10 kbit/s
Shift (Ph1…Ph0):
<
16 MHz:
0…±3.14 rad
>
16 MHz:
0…±10 rad
Resolution:
0.01 rad
Accuracy:
see under PM
Pulse modulation
Source:
external (rear panel)
Dynamic range:
f
<
2 GHz:
>
80 dB
f
>
2 GHz:
>
55 dB
Rise/fall times:
<
50 ns (typ.
<
10 ns)
Delay:
<
100 ns
Max. frequency:
2.5 MHz (typ. 5 MHz)
Input level:
TTL
Sweep mode
Range:
1…3000 MHz
Depth:
500 Hz…2999 MHz
Sweep time:
20 ms…5 s
Trigger:
internal
Protective functions
The synthesizer is protected against reverse power applied on RF output
up to 1 W for a 50 Ω source and against any DC source up to ±7 V. The pro-
tection disconnects the output until manually reset by operator.
Miscellaneous
Interfaces:
USB/RS-232 (HO820), IEEE-488 (option)
Configuration memories:
10
Safety class:
Safety Class I (EN61010-1)
Power supply:
115…230 V ±10 %, 50/60 Hz, CAT II
Power consumption:
approx. 40 VA
Operating temperature:
+5…+40 °C
Storage temperature:
-20…+70 °C
Rel. humidity:
5…80 % (non condensing)
3 GHz RF-Synthesizer HM8135
All data valid at 23 °C after 30 minutes warm-up.
Frequency
Range:
1 Hz…3 GHz
Resolution:
1 Hz
Settling time:
<
10 ms
Frequency Reference 10 MHz
Standard: TCXO
Temperature stability
(0…50 °C):
≤
±0.5 ppm
Aging:
≤
±1 ppm/year
Option:
OCXO (HO85)
Temperature stability
(0…50 °C):
≤
±1x 10
-8
Aging:
≤
±1x 10
-9
/day
Internal reference output:
(rear panel)
Level:
TTL
External reference input:
(rear panel)
Level:
>
0 dBm
Frequency:
10 MHz ±20 ppm
Spectral purity (without modulation)
Harmonics:
≤
-35 dBc
Non-harmonics:
≤
-50 dBc (
>
15 kHz from carrier)
Sub-harmonics:
≤
-50 dBc
Phase noise:
(at 20 kHz from carrier)
f
<
16 MHz:
≤
-120 dBc/Hz
16 MHz
≤
f
<
250 MHz:
≤
-95 dBc/Hz
250 MHz
≤
f
<
500 MHz:
≤
-105 dBc/Hz
500 MHz
≤
f
<
1000 MHz:
≤
-100 dBc/Hz
1 GHz
≤
f
<
2 GHz:
≤
-95 dBc/Hz
2 GHz
≤
f
<
3 GHz:
≤
-90 dBc/Hz
Residual FM:
typ.
<
4 Hz;
≤
6.5 Hz (in 0.3…3 kHz bandwidth)
Residual AM:
typ.
<
0.06 % (in 0.03…20 kHz bandwidth)
(Typical phase noise at 1 GHz)
Output level
Range:
-135…+13 dBm
Resolution:
0.1 dB
Display-Offset for ext. Attn.:
0.0…30.0 dB in 0.1 dB steps
Precision f
<
1.5 GHz; level
>
-120 dBm
for level
>
-57 dBm:
≤
±0.5 dB
for level
<
-57 dBm:
≤
±(0.5 dB + (0.2x (-57 dBm - level))/10)
Precision f
>
1.5 GHz; level
>
-120 dBm
for level
>
-57 dBm:
≤
±0.7 dB
for level
<
-57 dBm:
≤
±(0.7 dB + (0.5x (-57 dBm - level))/10)
Impedance:
50 Ω
V.S.W.R.:
f
≤
1 GHz:
≤
1.5
f
>
1 GHz:
≤
2.5
Modulation sources
Internal:
10 Hz…200 kHz sine wave
10 Hz…20 kHz square wave, triangle, sawtooth
Resolution:
10 Hz
External:
Input on front panel
Impedance:
10 kΩ II 50 pF
Input level:
2 V
pp
for full scale
Coupling:
AC or DC
Output:
Front panel
Level
2 V
pp
Impedance:
1 kΩ
Amplitude modulation (Level
≤
+7 dBm)
Source:
Internal or external
AM-depth:
0…100 %
Resolution:
0.1 %
Accuracy:
±4 % displayed rate ±0.5 %
(AM-depth
≤
80 %, f
mod
≤
50 kHz)
Ext. frequency resp. (to -1 dB):
10 Hz…100 kHz for AC
Distortion:
<
2 % (AM-depth
≤
60 %, f
mod
≤
1 kHz)
<
6 % (AM-depth
≤
80 %, f
mod
<
20 kHz)
Frequency modulation
Source:
internal or external
Deviation:
±200 Hz…400 kHz
(depending on frequency band)
Resolution:
100 Hz
Accuracy:
±3 % + residual FM (f
mod
≤
5 kHz)
±7 % + residual FM (5 kHz
<
f
mod
<
100 kHz)
Ext. frequency response: (to -1 dB):
DC coupling:
0…100 kHz
AC coupling:
100 Hz…100 kHz
Distortion:
<
1 % for deviation
≥
50 kHz at 1 kHz
<
3 % for deviation
≥
10 kHz
Phase modulation
Source:
internal or external
Deviation:
<
16 MHz:
0…3.14 rad
>
16 MHz:
0…10 rad
Resolution:
0.01 rad
Accuracy:
±5 % to 1 kHz + residual PM
Ext. frequency response (to -1dB):
DC coupling:
0…100 kHz
AC coupling:
100 Hz…100 kHz
Distortion:
<
3 % for f
mod
= 1 kHz and deviation = 10 rad
FSK modulation
Range (F0…F1):
16 MHz…3 GHz
Mode:
2 FSK levels
Data source:
external
Max. rate:
10 kbit/s
Shift (F1…F0):
0…10 MHz
Resolution:
100 Hz
Accuracy:
see under FM
PSK modulation
Mode:
2 PSK levels
Data source:
external
Max. rate:
10 kbit/s
Shift (Ph1…Ph0):
<
16 MHz:
0…±3.14 rad
>
16 MHz:
0…±10 rad
Resolution:
0.01 rad
Accuracy:
see under PM
Pulse modulation
Source:
external (rear panel)
Dynamic range:
f
<
2 GHz:
>
80 dB
f
>
2 GHz:
>
55 dB
Rise/fall times:
<
50 ns (typ.
<
10 ns)
Delay:
<
100 ns
Max. frequency:
2.5 MHz (typ. 5 MHz)
Input level:
TTL
Sweep mode
Range:
1…3000 MHz
Depth:
500 Hz…2999 MHz
Sweep time:
20 ms…5 s
Trigger:
internal
Protective functions
The synthesizer is protected against reverse power applied on RF output
up to 1 W for a 50 Ω source and against any DC source up to ±7 V. The pro-
tection disconnects the output until manually reset by operator.
Miscellaneous
Interfaces:
USB/RS-232 (HO820), IEEE-488 (option)
Configuration memories:
10
Safety class:
Safety Class I (EN61010-1)
Power supply:
115…230 V ±10 %, 50/60 Hz, CAT II
Power consumption:
approx. 40 VA
Operating temperature:
+5…+40 °C
Storage temperature:
-20…+70 °C
Rel. humidity:
5…80 % (non condensing)
3 GHz RF-Synthesizer HM8135
All data valid at 23 °C after 30 minutes warm-up.
Frequency
Range:
1 Hz…3 GHz
Resolution:
1 Hz
Settling time:
<
10 ms
Frequency Reference 10 MHz
Standard: TCXO
Temperature stability
(0…50 °C):
≤
±0.5 ppm
Aging:
≤
±1 ppm/year
Option:
OCXO (HO85)
Temperature stability
(0…50 °C):
≤
±1x 10
-8
Aging:
≤
±1x 10
-9
/day
Internal reference output:
(rear panel)
Level:
TTL
External reference input:
(rear panel)
Level:
>
0 dBm
Frequency:
10 MHz ±20 ppm
Spectral purity (without modulation)
Harmonics:
≤
-35 dBc
Non-harmonics:
≤
-50 dBc (
>
15 kHz from carrier)
Sub-harmonics:
≤
-50 dBc
Phase noise:
(at 20 kHz from carrier)
f
<
16 MHz:
≤
-120 dBc/Hz
16 MHz
≤
f
<
250 MHz:
≤
-95 dBc/Hz
250 MHz
≤
f
<
500 MHz:
≤
-105 dBc/Hz
500 MHz
≤
f
<
1000 MHz:
≤
-100 dBc/Hz
1 GHz
≤
f
<
2 GHz:
≤
-95 dBc/Hz
2 GHz
≤
f
<
3 GHz:
≤
-90 dBc/Hz
Residual FM:
typ.
<
4 Hz;
≤
6.5 Hz (in 0.3…3 kHz bandwidth)
Residual AM:
typ.
<
0.06 % (in 0.03…20 kHz bandwidth)
(Typical phase noise at 1 GHz)
Output level
Range:
-135…+13 dBm
Resolution:
0.1 dB
Display-Offset for ext. Attn.:
0.0…30.0 dB in 0.1 dB steps
Precision f
<
1.5 GHz; level
>
-120 dBm
for level
>
-57 dBm:
≤
±0.5 dB
for level
<
-57 dBm:
≤
±(0.5 dB + (0.2x (-57 dBm - level))/10)
Precision f
>
1.5 GHz; level
>
-120 dBm
for level
>
-57 dBm:
≤
±0.7 dB
for level
<
-57 dBm:
≤
±(0.7 dB + (0.5x (-57 dBm - level))/10)
Impedance:
50 Ω
V.S.W.R.:
f
≤
1 GHz:
≤
1.5
f
>
1 GHz:
≤
2.5
Modulation sources
Internal:
10 Hz…200 kHz sine wave
10 Hz…20 kHz square wave, triangle, sawtooth
Resolution:
10 Hz
External:
Input on front panel
Impedance:
10 kΩ II 50 pF
Input level:
2 V
pp
for full scale
Coupling:
AC or DC
Output:
Front panel
Level
2 V
pp
Impedance:
1 kΩ
Amplitude modulation (Level
≤
+7 dBm)
Source:
Internal or external
AM-depth:
0…100 %
Resolution:
0.1 %
Accuracy:
±4 % displayed rate ±0.5 %
(AM-depth
≤
80 %, f
mod
≤
50 kHz)
Ext. frequency resp. (to -1 dB):
10 Hz…100 kHz for AC
Distortion:
<
2 % (AM-depth
≤
60 %, f
mod
≤
1 kHz)
<
6 % (AM-depth
≤
80 %, f
mod
<
20 kHz)
Frequency modulation
Source:
internal or external
Deviation:
±200 Hz…400 kHz
(depending on frequency band)
Resolution:
100 Hz
Accuracy:
±3 % + residual FM (f
mod
≤
5 kHz)
±7 % + residual FM (5 kHz
<
f
mod
<
100 kHz)
Ext. frequency response: (to -1 dB):
DC coupling:
0…100 kHz
AC coupling:
100 Hz…100 kHz
Distortion:
<
1 % for deviation
≥
50 kHz at 1 kHz
<
3 % for deviation
≥
10 kHz
Phase modulation
Source:
internal or external
Deviation:
<
16 MHz:
0…3.14 rad
>
16 MHz:
0…10 rad
Resolution:
0.01 rad
Accuracy:
±5 % to 1 kHz + residual PM
Ext. frequency response (to -1dB):
DC coupling:
0…100 kHz
AC coupling:
100 Hz…100 kHz
Distortion:
<
3 % for f
mod
= 1 kHz and deviation = 10 rad
FSK modulation
Range (F0…F1):
16 MHz…3 GHz
Mode:
2 FSK levels
Data source:
external
Max. rate:
10 kbit/s
Shift (F1…F0):
0…10 MHz
Resolution:
100 Hz
Accuracy:
see under FM
PSK modulation
Mode:
2 PSK levels
Data source:
external
Max. rate:
10 kbit/s
Shift (Ph1…Ph0):
<
16 MHz:
0…±3.14 rad
>
16 MHz:
0…±10 rad
Resolution:
0.01 rad
Accuracy:
see under PM
Pulse modulation
Source:
external (rear panel)
Dynamic range:
f
<
2 GHz:
>
80 dB
f
>
2 GHz:
>
55 dB
Rise/fall times:
<
50 ns (typ.
<
10 ns)
Delay:
<
100 ns
Max. frequency:
2.5 MHz (typ. 5 MHz)
Input level:
TTL
Sweep mode
Range:
1…3000 MHz
Depth:
500 Hz…2999 MHz
Sweep time:
20 ms…5 s
Trigger:
internal
Protective functions
The synthesizer is protected against reverse power applied on RF output
up to 1 W for a 50 Ω source and against any DC source up to ±7 V. The pro-
tection disconnects the output until manually reset by operator.
Miscellaneous
Interfaces:
USB/RS-232 (HO820), IEEE-488 (option)
Configuration memories:
10
Safety class:
Safety Class I (EN61010-1)
Power supply:
115…230 V ±10 %, 50/60 Hz, CAT II
Power consumption:
approx. 40 VA
Operating temperature:
+5…+40 °C
Storage temperature:
-20…+70 °C
Rel. humidity:
5…80 % (non condensing)
Accessories supplied:
Line cord, Operating manual, USB/RS-232 Interface (HO820)
Recommened accessories:
Please refer to www.hameg.com
Typical phase noise at 1 GHz
Output level
Range
-135…+13 dBm
Resolution
0,1 dB
Display-Offset for ext. Attn. 0,0…30,0 dB in 0,1 dB steps
Precision
f <1.5 GHz; level >-120 dBm
for level >-57 dBm
for level <-57 dBm
≤±0,7 dB
≤±(0,7 dB + (0,5 x (-57 dBm - level))/10)
Precision
f >1.5 GHz; level >-120 dBm
for level >-57 dBm
for level <-57 dBm
≤±0,5 dB
≤±(0,5 dB + (0,2 x (-57 dBm - level))/10)
Impedance
50 Ω
V.S.W.R. f ≤1 GHz
f >1 GHz
≤1.5;
≤2.5
Modulation sources
Internal 110 Hz…200 kHz
10 Hz…20 kHz
sine wave,
square wave, triangle, sawtooth
Resolution
10 Hz
External
Impedance
10 kΩ II 50 pF
Input level
2 V
pp
for full scale
Coupling
AC or DC
Output (Front panel)
Level
2 V
pp
Impedance
1 kΩ
Amplitude modulation (Level -30 . . .+7dBm))
Source
internal or external
AM depth
0…100 %
Resolution
0,1 %
Accuracy
±5 % @ f
mod
1 kHz, f>16 MHz
Ext. frequency resp. (to -1 dB) 10 Hz…100 kHz for AC
Distortion
<2 % (AM-depth ≤60 %, f
mod
≤1 kHz)
<6 % (AM-depth ≤80 %, f
mod
<20 kHz)
Frequency modulation
Source
internal or external
Deviation
±200 Hz…400 kHz
(depending on frequency band)
Resolution
100 Hz
Accuracy
±3 % + res. FM (f
mod
≤5 kHz)
±7 % + res. FM (5 kHz <f
mod
<100 kHz))
Ext. frequency response (to -1 dB)
DC coupling
0…100 kHz
AC coupling
100 Hz…100 kHz
Distortion
<1 % for deviation ≥50 kHz at 1 kHz
<3 % for deviation ≥10 kHz
Phase modulation
Source
internal or external
Deviation
<
16 MHz
>
16 MHz
0…3,14 rad
0…10 rad
Resolution
0,01 rad
Accuracy
±5 % up to 1 kHz + residual PM
Ext. frequency response (to -1 dB)
DC coupling
0…100 kHz
AC coupling
100 Hz…100 kHz
Distortion
<3 % for fmod = 1 kHz and deviation = 10 rad
FSK modulation
Range (F0…F1)
16…3 GHz
Mode
2 FSK levels
Data source
external
Max. rate
10 kbit/s
Shift (F1…F0)
0…10 MHz
Resolution
100 Hz
Accuracy
±3 % + residual FM (f
mod
≤5 kHz)
±7 % + residual FM (5 kHz <f
mod
<100 kHz)
PSK modulation
Mode
2 PSK levels
Data source
external
Max. rate
10 kbit/s
Shift (Ph1…Ph0)
<
16 MHz
>
16 MHz
0…±3,14 rad
0…±10 rad
Accessories supplied
Line cord, Operating manual, CD
Recommended accessories
HO85 OCXO, temperature stability ±1 x 10
-8
(Installa-
tion only ex factory)
HO880 Interface IEEE-488 (GPIB), galvanically isolated
HZ13
Interface cable (USB) 1.8 m
HZ14
Interface cable (serial) 1 1
HZ20 Adapter, BNC to 4 mm banana
HZ21 Adapter, N male to BNC female
HZ24 Attenuators 50 Ω (3/6/10/20 dB)
HZ33 Test cable 50 Ω, BNC/BNC, 0.5 m
HZ34 Test cable 50 Ω, BNC/BNC, 1.0 m
HZ42 19“ Rackmount kit 2RU
HZ72
GPIB-Cable 2 m
Resolution
0,01 rad
Accuracy
±5 % up to 1 kHz + residual PM
Pulse modulation
Source
external
Dynamic range f <2 GHz
f >2 GHz
>80 dB
>55 dB
Rise/fall times
<50 ns (typ. <10 ns)
Delay
<100 ns
Max. frequency
2.5 MHz (typ. 5 MHz)
Input level
TTL
Sweep mode
Range
1…3.200 MHz
Depth
500 Hz…2.999 MHz
Sweep time
20 ms…5 s
Trigger
intern
Protective functions
The synthesizer is protected against reverse power applied to the RF output
up to 1 W for a 50 Ω source and against any DC source up to ±7 V. The
protection disconnects the output until manually reset by operator.
Miscellaneous
Interface
Dual-Interface USB/RS-232 (HO820),
IEEE-488 (GPIB) (optional)
Configuration memories
10
Safety class
Safety Class I (EN61010-1)
Power supply
115/230 V ±10 %, 50…60 Hz, CAT II
Power consumption
ca. 40 VA
Operating temperature
+5…+40 °C
Storage temperature
-20…+70 °C
Rel. humidity
5…80 % (non condensing)
Dimensions (W x H x D)
285 x 75 x 365 mm
Weight
approx. 5 kg
HAMEG Instruments GmbH | Industriestr. 6 | 63533 Mainhausen | Germany | Phone +49 (0) 6182 8000
R&S® is a registered trademark of Rohde & Schwarz GmbHv & Co. KG | HAMEG Instruments® is a registered trademark of HAMEG Instruments GmbH
Trade names are trademarks of the owners | Version 02.01 | 09 / 2014 | © HAMEG Instruments GmbH | Data without tolerance limits is not binding | Subject to change
Содержание HAMEG HM8135
