DataTale FireWire 400, Руководство пользователя

Страница: 11 / 14

11
CONNECTING THE ENCLOSURE KIT TO A
COMPUTER
Complete the following steps to connect the DataTale Mobile 2.5” HDD
Enclosure Kit to a host computer:
1. Power “on” the host computer.
2. Insert the USB2.0 or IEEE 1394(b) connector into the corresponding port in
the Enclosure Kit.
3. Connect the USB2.0 or IEEE 1394(b) connector into an available port on
the host computer. The host computer will automatically detect the
Enclosure Kit.
4. When connected, the hidden LED will light up on the lid (near its Front
View) and become steadily blue. When the HDD is being access, the
hidden LED (at the same place) will flash in blue. Now, the enclosure kit is
ready to be used!
The hidden LED on its top cover will indicate the power and data access
statuses.
The Enclosure should only be connected to a host computer via one
interface.
LED
When using FireWire 400/800, you can “Daisy chain” and connect other
computer hardware or digital devices to your Unit (such as digital video
camera, another HDD, DVD writer, and much more). However, you must use
the same interface in order for the “Daisy Chain” to work. The computer will
not recognize different interfaces if they are all used at the same time. If a
mix of connections is used, the resulting speed will be limited to the lowest
one available. If the USB port is connected to the host, the Unit cannot be
daisy chained.