![background image](http://html1.mh-extra.com/html/datataker/dt800/dt800_manual_3709337008.webp)
#
Fig. 9.
3.
A Quick Tour
The SSP has the following sensors and actuators
•
Potentiometer 1 – variable voltage, current or current loop
•
Potentiometer 2 – variable resistance
•
Potentiometer 3 – variable RTD simulator
•
Speaker / Microphone
•
Light Sensor – a silicon photodiode which outputs a voltage and current proportional to
ambient light
•
Ruler – configured as a full bridge, in which 2 halves of the ruler are two active arms of the
bridge
•
DB9 connector for serial data channel, configured as a PC COM1
•
2 push buttons – digital inputs
•
5 yellow LEDs –digital outputs
•
Single pole changeover Relay (under pcb) and 2 terminal block
•
Flexible tongue – configured as a full bridge, where fine copper tracks on the topside and
underside of the tongue are two active arms of the bridge
•
Magnetic pickup on the tongue
•
Analog output LEDs
Page
8
Содержание DT800
Страница 1: ...DT800 Demonstration Sensor Simulation Panel Operating Instructions...
Страница 5: ...Fig 3 Fig 4 Closing the case Page 5...
Страница 6: ...Fig 5 Fig 6 Page 6...
Страница 7: ...Fig 7 Fig 8 Page 7...