dataTaker DT800, Руководство пользователя

Страница: 4 / 29

#
1. Introduction
The dataTaker DT800 Sensor Simulation Panel (SSP) provides a number of different analog and
digital inputs and outputs for the DT800.
The Sensor Simulation Panel can be used for a variety of purposes including, but not limited to,
• Evaluating suitability of the dataTaker for particular applications, sensors and signal
combinations
• As a source of test inputs and outputs during the development and testing of dataTaker
programs and calculations procedures
• As a source of test inputs and outputs during the development and testing of applications
software for a host computer supervising the dataTaker
• For teaching the principles of data acquisition, process control, system monitoring, data
capture and transfer, etc. in educational institutions
2. Installing the Sensor Simulation Panel
The SSP replaces the DT800 terminal assembly. The SSP is installed on the DT800 as follows
Fig. 1.
Fig. 2.
Page 4