DI-2160 Event, State, and Count Data Logger
10
To connect signals to the DI-2160:
1.
Insert the stripped end of a signal lead into the desired terminal directly under the screw.
2.
Tighten
the
pressure
flap
by
rotating
the
screw
clockwise
with
a
small
screwdriver.
Make
sure
that
the
pressure
flap
tightens
only
against
the
signal
wire
and
not
the
wire
insulation.
Do
not
over-tighten.
3.
Tug
gently
on
the
signal
lead
to
ensure
that
it
is
firmly
secured.
