DATAPROCESS EUROPE S.p.A.
ST 230 USER MANUAL Pag.
42
14.2 RUBBER ROLLS CLEANING
Take a soft cloth wet with iso-
propylic alcohol and pass it over
the rubber rolls to eliminate all
the dirt (silicon residuals and
possible inked ribbon residuals)
posed during the labels printing
as indicated on picture 37 on your
left.
Picture 37
Remember that good printing
quality also depends on the good cleaning of rubber rolls cleaning as they are mechanical
parts dedicated to the paper movement.
14.3 PAPER GUIDES METALLIC SHAFTS CLEANING
The cleaning of the shafts is made to
eliminate glue residue from the self-
adhesive labels during the printing
process.
It is important to keep them clear as
the glues on the labels create a sticky
layer causing the paper to brake.
Keep a soft cloth wetted with iso-
propylic alcohol and pass it on the
shafts and on the inox metal strip lo-
cated after the roll holder being care-ful
to clear all the glue traces from the
above-mentioned parts, as indicated in
picture 38 on your left.
When the maintenance operations are
over, re-install the labels and the car-
tridge (following the instructions de-
scribed in the relative paragraphs),
close the covers and switch the
printer
ON.
Picture 38
