RSS_v180808n
RSS Series
Page 22
4.14.1.
Status and Control Page
The web page shows the current status of each enabled card in the chassis.
It also displays the status of the two power supplies in the lower right corner.
To operate one or more switch cards: Select the desired A/B Card(s) using the checkbox next to the card and
then click on the large A or B button under Switch Control. The screen will refresh with the new card status
shown. Buttons for Select All and Select None assist in making selections.
The Web page will not automatically refresh. It displays the correct status at the time the page was displayed.
To obtain the latest status, click on the Refresh button.
If cards are not installed in the system, their status will be reported as Position A. To avoid confusion, use the
Disable feature in the Setup for unused card slots. When cards are disabled, their name will continue to appear
on the web page or telnet screen, however, their status will not. Note cards slots 14-16 in the screenshot.
To simultaneously switch all cards in the chassis, click on either the Gang A or Gang B buttons. The
checkboxes need not be used for this operation.
A logout button is provided. Click this button to be instantly logged out. There is an automatic logout function if
there is no activity for two minutes. You can also just close the browser; however you will not be able to log back
in for two minutes.
