background image

11 Park Place / Paramus, New Jersey  07652
TEL: 201-967-9300             FAX: 201-967-9090

Website:  www. dataprobe.com    Email:  [email protected]

Technical Support Hotline:  (201) 967-8788

 

Overview 

The  iP-28xx series are network attached, IP addressed, Web Controlled, multi outlet, remote A/C power switches.  All units 
have two independent power feeds, each servicing 4 outlets.  These can be controlled either as tandem pairs of outlets for 
controlling systems with dual redundant power supplies, or to achieve higher current switching by dividing the eight systems 
across two power feeds.  The following models are covered in this manual. 
 
iP-2820 

8 switched outlets, for use on 115 VAC,  20 Amp Service – NEMA N5-20  

iP-2815 

8 switched outlets, for use on 115 VAC,  15 Amp Service – NEMA N5-15 

iP-2810 

8 switched outlets, for use on 115/230 VAC, 12 /10 Amp International – IEC 320 

 

“M”

 suffix designations in the model name indicate models equipped with an internal modem. 

 
 

 

 

 

 

 

 

 
 
 

Table of Contents 

Important Safety Information 

Hardware Installation 

Configuration 

IP Address 
Configuration Parameters 

Telnet Operation 

 Web Browser Operation 

Direct Messaging Control 

10 

Specifications 

11 

Tech Support & Warranty 

12

 

REF:  PWR\IP28xx_V040421E.DOC

 

Dual Input 

Web Controlled Power Switches 

 
 

Dial-up

In Band and Out-of Band
Web/Telnet Control

Содержание IP-28 Series













Отзывы: