The LED’s indicate the following:
•
Flashes on for 1.5 seconds then off for 0.5 seconds.
This indicates that the full lane width has been established for that slot e.g. x4 card in a x4 slot
•
Flashes on for 0.5 seconds then off for 1.5 seconds.
This indicates that a reduced lane width has been established and the slot is not working to maximum
efficiency e.g. a x1 card inserted into a x4 slot.
•
No LED’s flashing.
This indicates that lane width has not been established.
The LED’s will not flash on slots where no cards are installed.
VSN870 Series Approved Accessories
The items below are UL Listed Accessories for VSN870 series machines. Use of these plug-in cards within
VSN870 and Vision800X chassis, to build custom systems, will maintain the UL listed status for the system.
The cards can be used in any combination, in any order, in any slots on the backplane(s) without losing the
approval.
ImageDP4
Quad-screen graphics card
VisionRGB-E1S
Single channel HD video capture card
VisionRGB-E2S
Dual channel HD video capture card
VisionSD8
Eight channel SD video capture card
Vi1
Combination video capture card with 4 channels of SD and 1 channel of HD
VisionSDI2
Dual channel HD-SDI video capture card
VisionDVI-DL
Single channel Dual-Link video capture card
H-Link
Host Link card for expansion racks
S-Link
Slave Link card for expansion racks
ExCable
Cable for expansion racks
16
