STEP 6 CONFIGURE VIA A NETWORK
The Hx4 has a single ethernet port to allow users to add the device to their network.
Connect the Hx4 to a network using the LAN connector then open Wall Designer and
create your display layout. At the point where you associate the virtual device with a
physical device the list will display all Hx4’s currently connected to the network.
Click on the virtual device to display its properties, the Device Properties can be
changed in the same way as if connecting via USB. Once any changes have been
made click on Apply Settings to save.
See the Hx4 User Guide for information regarding network settings.
Page 5
Ethernet Port
