STEP 3 - CONNECT TO A NETWORK
Connect the controller to a network point (cables not supplied) using one of the LAN connectors on the rear panel.
STEP 4 - CONNECTING VIDEO INPUT SOURCES
As each VSN wall controller is custom built, the number and type of video inputs will differ from system to
system. If you have purchased a VSN wall controller with video inputs, the input connectors are located on the
rear panel as shown in the example below:
The printed input/output diagram shipped with your VSN wall controller shows where the video inputs are
located, and the types of input connectors installed in your system.
Connect the input sources to the relevant video input connectors. Cables may be supplied for some inputs;
see content list for details.
Video Input Connectors
4
Aetria WallControl Quick Start Guide
