DataMetrics 2000 Series страница 44 Скачать руководство пользователя

Страница: 44 / 46

MODEL 2000 PRINTER

OPERATION AND MAINTENANCE

DataMetrics Corporation

External paper feed configuration only:

Position the circuit breaker cover on the inside

of the front panel. Install the hardware that secures the cover.

c. Install the AC LINE, AC NEUTRAL, and CHASSIS GROUND terminals of the circuit

breaker harness on the power supply terminal block.

d. Connect the CHASSIS GROUND terminal of the circuit breaker harness to the inside

of the rear panel.

e. Install the AC LINE and AC NEUTRAL terminals of the circuit breaker harness on the

line filter output (bottom) connections.

f. Position the line filter on the chassis and install the hardware that secures the filter.

g. Install the line filter cover on the chassis.

h. Close the top cover of the printer.

6.5.5. Line Filter

Removal:

a. Open the top cover of the printer.

b. Remove the hardware that secures the line filter cover to the chassis. Remove the

cover from the chassis.

c. Remove the hardware that secures the line filter to the chassis.

d. Remove the input, output, and ground harness terminals from the line filter. Remove

the line filter from the chassis.

Installation:

a. Install the AC LINE, AC NEUTRAL, AND CHASSIS GROUND terminals of the power

input harness on the line filter input (top) connections.

b. Install the AC LINE and AC NEUTRAL terminals of the circuit breaker harness on the

line filter output (bottom) connections.

c. Position the line filter on the chassis and install the hardware that secures the filter.

d. Install the line filter cover on the chassis.

e. Close the top cover of the printer.

6.5.6. Controller Board

Removal:

a. Remove the print engine assembly per 6.5.2.

b. Remove the power supply, control panel, and parallel interface cables from the

controller board.

c. Remove the hardware that secures the controller board to the print engine base plate.

Remove the controller board from the chassis.

Содержание 2000 Series















































Результаты поиска

Содержание 2000 Series

Отзывы:

Похожие инструкции для 2000 Series

Бренды по названию

Популярные бренды

DataMetrics 2000 Series, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание 2000 Series

Отзывы:

Похожие инструкции для 2000 Series

Бренды по названию

Популярные бренды