manualshive.com logo in svg

Datamax Workstation w1110, Руководство пользователя

Поделиться
Скачать
Datamax Workstation w1110 Скачать руководство пользователя страница 28

3   |   Connections and Setup

Workstation Series User’s Guide

20

2. Close and latch the printer cover. 

3. Select the Stop/Resume button and the Feed/Cancel button together with long 

presses until the paper begins to move.

Note: 

The media will advance through the printer verifying the top-of-form.

Sensor Calibration

Sensor calibration is set during the manufacturing process and may only need to be 
performed after upgrading the printer’s software or resetting defaults. This is indicated by 
the red LED blinking slowly after power-up. 

1. Remove the paper from the printer.

2. Close and latch the printer cover.

3. Push the Reset, Stop/Resume, and the Feed/Cancel buttons together with one long 

press.

Note: 

Wait for the green LED to fast blink followed by solid green.

Printer Settings

All printer settings can be adjusted in the configuration utility or the printer’s internal web 
pages. Refer to the Help section in the utility for more information.

Содержание Workstation w1110


















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды