Datamax MA100-1010, Руководство пользователя

Страница: 49 / 109

49
RTS Threshold
：
This value should remain at its default setting of 2347. The
range is 0-2347 bytes. Should you encounter inconsistent data flow, only
minor modifications are recommended. If a network packet is smaller
than the preset RTS threshold size, the RTS/CTS mechanism will not be
enabled. The router sends Request to Send (RTS) frames to a particular
receiving station and negotiates the sending of a data frame. After
receiving an RTS, the wireless station responds with a Clear to Send (CTS)
frame to acknowledge the right to begin transmission.
Max Associated Clients
：
1-128.
AP Isolation
：
The default value is Off. This setting isolates wireless clients
so access to and from other wireless clients are stopped.
TX Antenna/ RX Antenna
：
Values are Auto, Left, Right, default value is
Auto. This is used in conjunction with external antennas to give them
optimum performance. On some router models left and right antennas
may be reversed depending on you point of view.
Preamble
：
Values are Long and Short, default value is Long. If your
wireless device supports the short preamble and you are having trouble
getting it to communicate with other 802.11b devices, make sure that it is
set to use the long preamble.
Wireless GUI Access: The default value is Enabled. The setting allows
access to the routers setup (GUI) from wireless clients. Disable this if you
wish to block all wireless clients from accessing the setup pages.
Radio Time Restrictions: The Radio Times Restriction facility constitutes a
time switch for the radio. By default, the time switch is not active and the
WLAN is permanently on. Enable the time switch, if you want to turn off
the WLAN during some hours of the day. Hours during which the WLAN is
on are marked in green, while red indicates that the radio is off. Clicking
on the respective hour toggles between on and off.