Datamax H-4212X, Руководство оператора

Страница: 39 / 186

H-Class 29
3.4 Quick Calibration
Quick Calibration fine-tunes the printer for your media and should be performed during
initial setup or after switching media. With media installed and the sensor position adjusted,
perform calibration as follows:
•
With the printer idle, press and hold the FEED Key until one complete label advances
and then release the key.
Upon successful completion, CALIBRATION COMPLETED will be displayed followed by
READY. (If another message is displayed, however, see below.)
;
If the printer displays CANNOT CALIBRATE or stops feeding mid-label, press
and hold the FEED Key until two (or more) labels are advanced before
releasing the key. If this method also fails, see Media Sensor Calibration
(Section 5.2).
•
WARNING LOW BACKING may appear if using notched media, or media
with a transparent liner; however, calibration was successful.
•
Media containing large gaps may require a change in the PAPER EMPTY
DISTANCE; see Section 4.2.1.