Datamax Ex2 Скачать руководство пользователя страница 300

Страница: 300 / 302

Glossary

284

Class Series Programmer’s Manual

DPL (Datamax Programming Language)

programming commands used specifically for control of

and label production in Datamax printers.

fan-fold

Media that is folded and stacked.

feed speed

The rate at which the media moves under the print head in non-printed areas or when the

FEED Key is pressed.

Flash memory

Non-volatile memory (does not require printer power to maintain data) that can be

erased and reprogrammed, used to hold the printer’s operating program.

font

A set of alphanumeric characters that share a particular typeface.

gap

space between die-cut or notched labels used to sense the top-of-form.

IPS (inches per second)

Imperial measurement of printer speeds.

label

A paper or synthetic printing material, typically with a pressure sensitive adhesive backing.

label length

The distance from the top of the label to the bottom of the label as it exits the printer.

label repeat

The distance from the top of one label to the top of the next label.

label tracking

Excessive lateral (side to side) movement of the media as it travels under the print head.

label width

The left to right measurement of the label as it exits the printer.

media

Generalized term for all types of printing stocks, including: roll fed, continuous, butt-cut, die-cut,

reflective, and fanfold.

media hub

Device in the printer used to support roll media.

media sensor

An electronic device equipped with photosensors to detect media and the top-of-form on

die-cut, notched or reflective media.

MMPS (millimeters per second)

Metric measurement of printer speeds.

notched stock

Media, typically tag stock, with holes or notches in the material that is used to signal the

top-of-form. The printer must be set to ‘gap’ to use this media type.

perforation

Small cuts extending through the backing and/or label material to facilitate their separation.

Also referred to as “perf”.

preprinted media

Label stock that contains borders, text, or graphics, floodcoating, etc.

present sensor

An electronic sensor that provides a signal to the printer firmware that a label is present,

typically located beyond the print head, where the labels exits the printer.

print speed

The rate at which the media moves under the print head during the printing process.

Содержание Ex2















































































































































































































































































































Результаты поиска

Содержание Ex2

Отзывы:

Datamax Ex2, Руководство программиста, Страница: 300 / 302

Результаты поиска

Содержание Ex2

Отзывы: