3.3.3 Selected
hit
The ‘selected hit’ function checks and displays the current ID code read is present in the
memory. This function is useful to identify a specific item in a large group of items. When this
function is OFF, the reader does not show anything. While it is ON, it shows the message “TAG
ID FOUND” when the tag read
match the selected ID
, or the selected tag ID to be found when
the tag ID does not match.
The following figure shows the selected hit function enabled:
Thu 07.02.08 14:48:22
85%
PSK
D004811B5E
Type
NO TAG SELECTED
No ID code is selected
from the memory
In this case; the message “NO TAG SELECTED” appears. This means that you have to select
an ID code thanks to the ‘browse memory’ function (refer to chapter 3.2 for details). Therefore,
press the ENTER round button to enter the main menu, then press the RIGHT button to enter
the browse menu. Scroll through the ID codes list until you find the needed ID code. When
highlighted, press the ENTER button so that it is selected for the ‘selected hit’ function.
BROWSE MEMORY
Thu 07.02.08 14:48:22
0006 D005267DB7
0007 D004811B5E
0008 D002C2BE51
0009 D0065BAFF5
0010 D004811B5E
Thu 07.02.08 14:48:22
85%
PSK
D004A11F42
Type
D005267DB7
At this point you are ready to search the selected ID code in a large group of items. When you
read an ID code, which matches the selected one, the reader displays the message “TAG ID
FOUND!” and beeps three times.
Thu 07.02.08 14:48:22
85%
PSK
D005267DB7
Type
TAG ID FOUND!
R-PO7470 Manual – v. 1.1 – August 2008
9
