9.4.23 Gets the “selected hit” function
•
Command
syntax:
“?SH”
[CR]
•
Command answer:
[CR][LF] ”SH=#” [CR][LF]
•
Command action:
gets the “selected hit” function status
•
Parameter range:
#= 0 or 1.
Description: this command returns the selected hit function status.
1: enable function. 0: disable function.
9.4.24 Sets the “reading beep” function
•
Command
syntax:
“.RB#”
[CR]
•
Command
answer:
[LF]
•
Command action:
sets the “reading beep” function
•
Parameter range:
#= 0 or 1.
Description: this command sets the reading beep function. 1: enable function. 0: disable function.
9.4.25 Gets the “reading beep” function status
•
Command
syntax:
“?RB”
[CR]
•
Command answer:
[CR][LF] ”RB=#” [CR][LF]
•
Command action:
gets the “reading beep” function status
•
Parameter range:
#= 0 or 1.
Description: this command returns the reading beep function status.
9.4.26 Sets the “key beep” function
•
Command
syntax:
“.KB#”
[CR]
•
Command
answer:
[LF]
•
Command action:
sets the “key beep” function
•
Parameter range:
#= 0 or 1.
Description: this command sets the key beep function. 1: enable function. 0: disable function.
9.4.27 Gets the “key beep” function status
•
Command
syntax:
“?KB”
[CR]
•
Command answer:
[CR][LF] ”KB=#” [CR][LF]
•
Command action:
gets the “key beep” function status
•
Parameter range:
#= 0 or 1.
Description: this command returns the key beep function status.
R-PO7470 Manual – v. 1.1 – August 2008
29
